English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Dry-service core construction
The chipboard core provides the panel body beneath the laminate. Sealed edges matter around lifting points and service cut-outs, where the core might otherwise become exposed.
STJH-ANTISTATIC-HPL-RAISED-ACCESS-FLOOR-WOODCORE-40MM
Antistatic HPL Raised Access Floor 40 mm Woodcore
A woodcore access panel with an HPL wearing face for dry technical interiors requiring regular cable access.
- 600 x 600 x 40 mm panel
- Wood-based high-density core
- HPL face with sealed PVC perimeter
About This Product
This 600 x 600 x 40 mm panel combines high-density chipboard with an antistatic high-pressure laminate face. Galvanized-steel backing and black PVC edge trim enclose the underside and perimeter of the wood-based core. At approximately 10 kg per panel, the configuration supports practical service handling. It is selected for dry technical rooms rather than locations exposed to repeated washdown.
Основные характеристики
Accessible service void
Individual panels can be lifted to reach cables and instruments, allowing changes to the room's services without opening a permanently bonded floor structure.
Distinct wearing and backing faces
The HPL top provides the walking surface while the metal underside supports the panel assembly. The selected support system must suit the actual equipment layout.
Технические параметры
| Panel Dimensions | 600 x 600 mm |
|---|---|
| Толщина панели | 40 mm |
| Основной материал | High-density chipboard |
| Top Finish | Antistatic HPL |
| Underside | Galvanized steel backing |
| Edge Trim | Black PVC |
| Reference Panel Weight | Approximately 10 kg |
| Installation | Pedestal-supported access-floor system |
| Service Environment | Dry internal technical rooms |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Applications
Suitable for control rooms and dry technical suites with underfloor cables or instrument connections. Antistatic surface selection does not establish a complete ESD system by itself; match the panel finish and supports to the intended electrical arrangement. Keep cleaning water out of exposed cut-outs and do not leave lifted panels resting on vulnerable corners.
Solutions for Your Application
Repeated service work damages the edges of lifted panels.
Use suitable lifting tools and protect the sealed perimeter during removal, storage and refitting.
A new cable opening exposes the woodcore to cleaning water.
Finish the opening with a compatible protected edge or grommet and maintain dry-service cleaning practices around it.
Доступные варианты
Choose the HPL colour, pedestal height and planned service openings. Select the necessary support and loading arrangement separately, and provide spare edge-protected modules for areas likely to change during equipment upgrades.
Planning a Antistatic HPL Raised Access Floor 40 mm Woodcore specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
