English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Staged coating application
The conductive primer is allowed to cure before the wearing coat is placed; room temperature determines the interval between these operations.
STJH-ANTISTATIC-EPOXY-FLOORING-TEXTURED-10
Antistatic Epoxy Flooring 1 mm Textured
A shallow ESD floor using a thixotropic epoxy wearing layer to produce texture without a separate aggregate bed.
- Approximately 1 mm system thickness
- Thixotropic textured epoxy wearing coat
- Conductive primer with earthing connections
About This Product
TEXTURED-10 combines an epoxy primer, grounded conductive primer and textured ESD wearing coat. A thixotropic additive helps the final resin retain its surface profile within an approximately 1 mm construction. Unlike a silicon-carbide broadcast system, it does not require a separate coarse aggregate layer followed by a heavy seal. The build is intended for internal static-sensitive working routes.
Основные характеристики
Chemical-contact wearing face
The exposed epoxy provides the chemical-contact surface, so cleaner and process-fluid compatibility is assessed for that wearing resin rather than for the buried primer.
Defined cleaning access
A modest texture offers a different walking contact from smooth ESD epoxy while remaining accessible to suitable scrubbing equipment.
Технические параметры
| Wearing Resin | ESD epoxy |
|---|---|
| Nominal Thickness | Approximately 1 mm |
| Texture Additive | Thixotropic extender |
| Layer Structure | Epoxy primer, conductive primer, ESD wearing layer |
| Finish | Textured gloss |
| Earthing | Connected through conductive primer |
| Application Temperature | 15-30 °C |
| Service Environment | Interior |
| Footwear Interface | Compatible ESD footwear |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Applications
Consider this model for electronics production routes, data-centre support rooms and pharmaceutical service areas. Surface texture, cleaning residues and footwear contact all influence practical performance, so the intended traffic and maintenance method should guide the choice.
Solutions for Your Application
A smooth ESD finish is unsuitable for the room's walking surface.
Use the textured wearing coat while retaining the complete conductive primer and earthing sequence.
Carts return while the new surface is only ready for pedestrians.
Separate initial foot access from light-traffic reopening and full cure, using the actual floor temperature to schedule each stage.
Доступные варианты
Specify the solid colour and perimeter layout, together with the location of grounding connections. The thixotropic formulation should remain consistent across the installation to avoid abrupt changes in surface profile.
Planning a Antistatic Epoxy Flooring 1 mm Textured specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
