STjh 500 mm air-to-air plate heat recovery unit with a compact narrow aluminum crossflow core on white.

STJH-AIR-TO-AIR-PLATE-HEAT-RECOVERY-500MM

Air-to-Air Plate Heat Recovery Unit 500 mm

The smallest crossflow plate core for recovering sensible heat while keeping supply and exhaust physically separated.

500 mm plate size
250-1000 mm module width
1.9-6.0 mm spacing options

Введение продукции

This compact H2 plate core uses a 500 mm plate size and module widths from 250-1000 mm. Aluminum crossflow passages are available with 1.9-6.0 mm spacing, letting resistance and fouling tolerance be balanced for small clean AHUs. Depending on seal selection, the family supports 90-240 C maximum temperature; the chosen seal and leakage requirement must match the actual air streams.

Основные характеристики

Separated airflow paths

Alternating aluminum channels exchange sensible heat without intentional mixing or a rotating matrix.

Compact core geometry

The smallest plate diagonal fits local and small clean-air units.

Selectable channel spacing

Wider gaps improve fouling tolerance while tighter gaps increase surface density.

Технические параметры

Plate Size	500 mm
Module Width	250-1000 mm
Plate Spacing	1.9-6.0 mm options
Plate Material	Aluminum
Flow Arrangement	Crossflow
Maximum Temperature	90-240 C depending on seal
Moving Parts	None
Recovery Type	Primarily sensible
Primary Duty	Small separated-stream heat recovery
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Applications

For small clean AHUs and laboratory ventilation systems where supply and exhaust should remain physically separated.

Solutions for Your Application

Condensate freezes in the small exhaust passages during winter operation.Apply bypass, preheat or airflow control based on exhaust condition and frost calculation.

Narrow plate spacing fouls rapidly in the actual exhaust stream.Select a wider passage, provide filtration and preserve access for cleaning and drainage.

Доступные варианты

Confirm airflows, temperatures, plate spacing, module width, seal material, bypass, condensate pan, filtration and access.

Planning a Air-to-Air Plate Heat Recovery Unit 500 mm specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой