STjh activated-carbon filter media roll for basic-gas control main view

STJH-ACTIVATED-CARBON-MEDIA-BASE

Activated Carbon Air Filter Media Base-Impregnated

An application-specific carbon formulation for airborne bases affecting lithography and other sensitive clean processes.

Ammonia and amine targeting
Low-outgassing option
Sheet or loose-fill supply

Запрос котировки Просмотреть продукты

Введение продукции

This carbon formulation is impregnated for basic contaminants, particularly ammonia and amines. It can be incorporated into a pleatable nonwoven for compact filters or used as loose fill where a deeper reaction bed is required. Low-outgassing options suit semiconductor environments, but media quantity and replacement timing must be calculated from the measured base load because pressure drop does not indicate chemical exhaustion.

Основные характеристики

Base-specific chemistry

The impregnation is selected to retain basic gases that untreated carbon may hold poorly.

Compact or deep-bed conversion

Pleatable sheet supports low-profile filters while pellets provide larger chemical inventory.

Sensitive-process material control

Cleanroom-oriented carrier and adsorbent choices reduce unnecessary emissions near lithography areas.

Технические параметры

Adsorbent	Base-target impregnated activated carbon
Target Contaminants	Ammonia and amines
Media Format	Embedded pleatable nonwoven or loose fill
Capture Method	Gas-specific chemisorption
Cleanliness	Low-outgassing option
Selection Basis	Application-specific base load
Humidity Factor	Included in service-life calculation
Conversion	Panel, compact cartridge or deep-bed cell
Change Criterion	Base-gas breakthrough or calculated capacity
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Applications

For semiconductor lithography, coating and other clean processes where airborne ammonia or amines can affect yield or product surfaces.

Solutions for Your Application

A general VOC carbon stage provides little usable capacity for ammonia.Use a base-target impregnation and size the media inventory from measured ammonia and amine concentration.

The filter is changed by pressure drop after the chemical media has already broken through.Set replacement from exposure calculations, media samples or downstream AMC monitoring independent of particle resistance.

Доступные варианты

Confirm ammonia and amine profile, impregnation, media loading, format, carrier cleanliness, humidity, airflow and monitoring method.

Planning a Activated Carbon Air Filter Media Base-Impregnated specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой