Yellow ESD grounding socket with dual banana jacks snap and earth lead

ESD и антистатические продукты

Заземляющая розетка ESD

The ESD Grounding Socket is a fixed bonding point that consolidates wrist-strap, mat and equipment-ground connections at a workstation.

Dual banana jacks provide convenient operator connection points.
Central snap supports mat or accessory bonding.
High-visibility faceplate distinguishes the ESD ground interface.

Запрос котировки Просмотреть продукты

Введение продукции

A durable yellow insulating faceplate carries two standard banana receptacles and a stainless snap interface. Rear terminals join the contacts to a green-and-yellow protective-earth conductor ending in a ring lug. Recessed mounting holes support bench, wall or furniture-panel installation while keeping the connection point visible and accessible.

Основные характеристики

Two banana receptacles serve operator and guest leads.

Stainless snap accepts common mat-grounding hardware.

Rear screw or stud terminal provides a defined earth connection.

Bright yellow housing aids recognition during audits.

Recessed fasteners produce a tidy fixed installation.

Modular faceplate format suits benches and partition panels.

Решения для вашего приложения

A fixed bonding point must be readily identifiable, mechanically secure and electrically joined to the designated facility grounding network.

Operators connect to an unverified metal fixture.A dedicated yellow faceplate clearly identifies the approved bonding point.

One socket cannot serve a second operator.Dual banana receptacles provide two accessible cord connections.

Mat and wrist-strap connections compete for the same interface.Separate banana jacks and snap hardware accommodate different terminations.

A loose rear wire creates intermittent grounding.Mechanical terminal hardware and a crimped ring lug establish a serviceable connection.

Surface-mounted hardware is snagged or damaged.Recessed mounting holes and a compact plate protect the working interfaces.

Типичные приложения

Electronics assembly workbenches.Laboratory and service stations.ESD-protected room partitions.Grounded packing and inspection tables.Training and visitor work positions.

Технические параметры

The representative dimensions below cover common fixed earth-bonding points; plate format, socket count, snap type and lead length can be configured.

Основной материал	Flame-retardant ABS faceplate with brass and stainless contacts
Толщина панели	3.0–5.0 mm faceplate thickness
эффективная ширина	85–120 mm faceplate width
Максимальная длина	Up to 3000 mm protective-earth lead length
Толщина линий стали	0.8 mm nominal stainless snap and terminal hardware thickness
Плотность ядра	1030-1080 кг/м³ плотность смолы ABS
Теплопроводимость	0,17-0,22 Вт/(м · К)
Поверхностная отделка	High-visibility yellow matte molded faceplate with black and silver contacts
Объединенный тип	Dual banana receptacles and 10 mm snap bonded to rear earth terminal and ring-lug lead
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

One, two or four banana jacks.4 mm or 10 mm snap formats.Surface, flush or bench-edge mounting.Yellow, black or white faceplates.Straight lead or rear screw-terminal connection.Alternative cable length and ring-lug bore.

Planning a ESD Grounding Socket specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой