English
Португальский
Испанский язык
Японский
Индонезийский
Немецкий
Турецкий
Вьетнамский язык
Французский
Русский языкТекущий
Арабский язык
Тайский
Японский язык
Корейский
Brushless motor construction
Electronic commutation avoids brush replacement as a routine motor maintenance task.
УФУ и терминальное оборудование для очистки воздуха
Фильтры вентилятора EC
An electronically commutated fan filter unit for cleanroom installations that need adjustable motor speed and coordinated airflow settings.
- Brushless EC Drive
- Electronic Speed Regulation
- Modular Final Filtration
- Configurable Control Interface
Введение продукции
The EC fan filter unit brings the blower, electronic motor drive and final filter together in a modular clean-air assembly. Electronic commutation replaces mechanical brushes, while the drive regulates fan speed. This arrangement is useful where ceiling units need to be balanced individually or adjusted as a group. The control package, filter frame and service layout determine how the unit connects to the wider cleanroom installation.
Основные характеристики
Adjustable fan operating point
Motor-speed regulation allows the airflow setting to be matched to the installed filter and air path.
Control-system flexibility
The specified interface can support local operation or integration with a compatible facility controller.
Решения для вашего приложения
For an EC FFU array, the useful questions are how each unit is adjusted, what feedback is available and how the selected duty is verified.
Ceiling units need different settings after air balancing.Specify individual adjustment and an accessible means of identifying each unit; add grouped control only where the selected electronics support it.
A controller shows fan speed but operators need to know actual clean-air delivery.Pair the motor controls with an appropriate airflow measurement or monitoring arrangement rather than treating a speed indication as proof of airflow.
Energy comparisons use different filters or pressure conditions.Compare measured electrical input at the same airflow, external resistance and filter condition. No fixed saving percentage follows from the EC designation alone.
Типичные приложения
Large unidirectional-flow cleanroom ceilingsSemiconductor and microelectronics productionBiotechnology processing areasFacilities with centralized airflow monitoringEnergy-sensitive recirculating cleanrooms
Технические параметры
Common EC ceiling-module references with independently selectable filtration and motor-control interfaces.
| Unit Type | Motorized final-filter module for cleanroom air supply |
|---|---|
| Motor Technology | Electronically commutated brushless drive |
| Common Module Formats | Nominal 600 × 600 mm or 600 × 1200 mm ceiling modules |
| Typical Unit Height | Approximately 250–380 mm for conventional EC ceiling FFU assemblies |
| Common Mains Supply Options | 220–240 V AC, single phase, with 50 Hz or 60 Hz versions |
| Варианты жилья | Aluminium, powder-coated steel or stainless-steel casing |
| Airflow Adjustment | Electronic motor-speed regulation |
| Filtration Arrangement | Fan and replaceable final-filter assembly in one module |
| Filter Options | H13/H14 HEPA or U15 ULPA filter configurations |
| Control Interface Options | Local potentiometer, 0–10 V speed-command input or Modbus RTU network control, according to controller version |
| Service Options | Top-side motor access or room-side service configurations for the filter, motor and controller |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Configuration choices include local or remote speed adjustment, compatible network controls, final-filter selection and top-side or room-side servicing. Availability depends on the selected motor, controller and housing arrangement; these choices are not all included in a base EC unit.
Selection and Installation
Define the airflow duty, not just motor speed
Specify required airflow in m³/h together with the external static pressure in Pa, the selected filter and its initial resistance. Allow for the additional resistance expected as the filter loads. An EC motor or a speed command alone does not provide automatic constant-airflow control. Where that function is needed, include the sensor, control loop and operating limits in the equipment scope.
Match electrical and control connections
The low-voltage speed signal is not the motor power supply. Obtain the unit input voltage, frequency, running current, starting characteristics and power at the selected duty before sizing circuits. Select local adjustment, an analog input or network control to suit the facility. A networked arrangement also needs an agreed protocol, addressing method, cable topology and defined status or alarm signals. Motor-speed feedback is not a direct airflow measurement.
Leave space for maintenance
Check overall length, width and height in mm, ceiling opening, support points, weight and unobstructed inlet clearance. Decide whether the filter, fan and controller will be accessed from above or from the room; access to one component does not establish access to all three. Isolate the electrical supply before service and protect the filter face and perimeter seal during installation.
Separate the base unit from options
The EC designation identifies the drive technology. It does not by itself include a supervisory controller, network cabling, airflow sensor, ULPA filter, duct collar or room-side service arrangement. List the selected filter, seal, control equipment and accessories separately in the quotation. Compare the AC fan filter unit when a different drive arrangement is preferred, or the low-profile fan filter unit when ceiling height is the main constraint.
Planning a EC Fan Filter Unit specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
