STjh medium 600 mm stainless vertical unidirectional pass box with enlarged HEPA plenum and side return-air channel

STJH-VERTICAL-UNIDIRECTIONAL-PASS-BOX-600

Vertical Unidirectional-Flow Pass Box 600 mm

A mid-size vertical-flow pass box for routine transfer of prepared trays and production bins.

600 mm cubic work zone
465 x 465 mm HEPA filter
220 V single-phase supply

Introdução do produto

This 600 mm cube increases usable volume by roughly 73% over the 500 mm model and pairs it with a 465 x 465 mm HEPA filter. Nominal 0.45 m/s downward flow remains common across the family, while the 220 V single-phase supply defines the standard electrical basis. The intermediate size is intended for routine totes that need more handling clearance without moving to the largest enclosure.

Características-chave

Routine tote capacity

The 600 mm cube accepts medium bins while remaining convenient for wall-height handling.

Matched filter growth

A larger 465 mm filter supports the expanded chamber face at the same nominal velocity.

Common facility power

Single-phase 220 V operation simplifies integration in many laboratory utility zones.

Parâmetros técnicos

Useful Dimensions	600 W x 600 D x 600 H mm
Outside Dimensions	850 W x 600 D x 1000 H mm
HEPA Filter Size	465 x 465 mm
Air Velocity	0.45 m/s nominal
Power Supply	AC 1-phase 220 V, 60 Hz
Airflow Direction	Vertical downward unidirectional flow
Door Arrangement	Opposing interlocked doors
Construction	Powder-coated steel or SUS304
Typical Load	Medium totes and packaged materials
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Applications

For routine aseptic movement of component trays, sealed bins and prepared materials. Procurement should compare the load's diagonal handling space with the 600 mm cube and reserve access to the top filter section.

Solutions for Your Application

The 500 mm chamber does not leave hand clearance around standard production totes.Use the 600 mm cube to create a practical loading margin without oversizing the wall opening.

A site frequency mismatch could affect motor operation.Confirm voltage and frequency before manufacture rather than assuming the cited 220 V, 60 Hz basis.

Opções disponíveis

Choose cabinet material, interlock controls, UV accessory, pressure indication and alternate electrical supply. Load testing should use the actual tote orientation.

Planning a Vertical Unidirectional-Flow Pass Box 600 mm specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe