Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Higher splash band
The extended upstand covers more of the lower wall where rinsing and floor cleaning are frequent.
STJH-SEAMLESS-EPOXY-COVE-BASE-H150-R25
Seamless Epoxy Cove Base 150 mm High with 25 mm Radius
A taller resin upstand and wider curve serve perimeters with greater splash exposure.
- Approximately 150 mm height
- Broad 25 mm base radius
- Controlled vertical mortar build
About This Product
This configuration raises the resin finish approximately 150 mm above the floor and uses a 25 mm radius at its base. The larger curve leaves more room for a squeegee or cleaning cloth to reach the junction. Because the vertical section is taller, the mortar build is controlled to limit sagging; a prepared backing and a straight upper termination are part of the finished geometry.
Características-chave
Open cleaning radius
The wider transition reduces the abrupt change in direction at the base, making the curve easier to reach with suitable cleaning tools.
Straight upper edge
A tape line or cove strip gives the applicator a defined top boundary instead of an irregular freehand termination.
Parâmetros técnicos
| Material | Trowelled epoxy cove mortar |
|---|---|
| Height | Approximately 150 mm (6 in) |
| Base Radius | Approximately 25 mm (1 in) |
| Vertical Thickness | Approximately 3.2 mm maximum for the selected tall-cove method |
| Backing | Prepared stable wall base |
| Top Edge | Tape-line or cove-strip termination |
| Surface Treatment | Smoothed and sealed |
| Junction | Integral resin-floor connection |
| Primary Function | Higher washdown perimeter protection |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Applications
Consider for wet processing support rooms, food-preparation perimeters and wash areas finished with compatible resin floors. The taller cove should meet a sound wall finish, and any change in backing thickness should be corrected behind the mortar instead of creating an excessively thick vertical layer.
Solutions for Your Application
A high cove sags or cracks during curing.
Build out an uneven backing first and keep the vertical mortar within the selected application thickness.
A cleaning blade cannot reach the tight bottom corner.
Use the broader radius and maintain its shape when the adjoining floor course is installed.
Opções disponíveis
Choose a flush tape-line termination or a suitable cove strip according to the adjoining wall finish. Confirm color, local splash height and returns at doors before the perimeter is formed.
Planning a Seamless Epoxy Cove Base 150 mm High with 25 mm Radius specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
