STjh wide L-shaped air shower with twin front entrance doors and a perpendicular double-leaf exit on the right

STJH-L-SHAPED-AIR-SHOWER-1900X1900

L-Shaped Cleanroom Air Shower 1900 × 1900 mm Wide

A broad square L-shaped air shower with a 1780 mm opening for grouped personnel and assisted material movement.

1900 x 1900 mm internal chamber
1780 mm wide doorway
Wide right-angle transfer path

Introdução do produto

This large corner chamber expands both internal axes to 1900 mm and doubles the clear doorway width to 1780 mm. The square work zone supports grouped users or staff accompanying a clean cart, while perpendicular entry and exit doors preserve a right-angle facility route. Its 2500 x 2000 x 2600 mm exterior demands more floor and overhead space than the narrow family members.

Características-chave

Broad internal turning area

The square chamber provides room for several operators or an attendant beside a compatible cart.

Double-width access

The 1780 mm clear opening accepts loads that cannot pass the 890 mm personnel door used by the narrower models.

Multi-side jet exposure

High-velocity filtered air can be directed across the larger occupancy zone from the surrounding nozzle walls.

Parâmetros técnicos

Internal Dimensions	1900 W x 1900 D x 1950 H mm
External Dimensions	2500 W x 2000 D x 2600 H mm
Door Opening	1780 W x 1950 H mm
Traffic Pattern	Wide L-shaped 90-degree route
Jet Velocity Range	20-32 m/s
Airflow Type	Multi-side HEPA-filtered recirculation
Controls	Programmable microprocessor shower sequence
Door System	Interlocked wide entry and exit doors
Use Envelope	Grouped personnel or compatible assisted loads
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Applications

Intended for busy cleanroom entrances, wide gowning transitions and material-assisted personnel routes in pharmaceutical, semiconductor and research facilities. Check the turning radius, door approach and occupied load before choosing this layout instead of a dedicated cargo shower.

Solutions for Your Application

Personnel and a small transfer cart cannot turn inside a narrow corner chamber.Use the 1900 mm square interior and 1780 mm doorway to create a wider controlled turning zone.

The larger enclosure may conflict with ceiling services or egress paths.Reserve the full 2500 x 2000 x 2600 mm equipment envelope plus maintenance access during layout design.

Opções disponíveis

Configure shell finish, wide-door type, handing, cycle logic, nozzle arrangement and access controls. Load dimensions and floor requirements should be defined if carts will share the personnel route.

Planning a L-Shaped Cleanroom Air Shower 1900 × 1900 mm Wide specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe