STjh 1497 x 849 mm fresh air handling unit with a deep galvanized chassis and 500 mm connection envelope on white.

STJH-FRESH-AIR-HANDLING-UNIT-1497X849

Fresh Air Handling Unit 1497 × 849 mm

The deepest selected single-flow fresh-air unit, using a 1497 x 849 x 441 mm cabinet and a 500 mm connection envelope for larger components.

849 mm-wide component face
500 mm connection envelope
Largest selected single-flow chassis

Solicite um orçamento. Browse produtos

Introdução do produto

With an 849 mm cabinet width, 441 mm depth and 81 kg mass, this model provides the largest component envelope in the selected fresh-air series. It is intended for a higher outdoor-air requirement where a separate extract system already exists and the supply stream needs filtration and thermal conditioning.

Características-chave

Largest treatment envelope

The deeper cabinet accepts larger fan, filter and coil components than the two smaller fresh-air units.

Independent replacement air

The single supply path makes the model suitable for replacing air removed by process or room exhaust.

Defined support load

The documented 81 kg mass supports early coordination of frames, hangers and service clearances.

Parâmetros técnicos

Cabinet Dimensions	1497 x 849 x 441 mm
Connection Envelope	500 mm
Equipment Weight	81 kg
Air Path	Single-flow conditioned outdoor air
Supply Fan	Integrated direct-drive assembly
Filtration	Outdoor-air prefilter and fine-filter options
Thermal Treatment	Heating and cooling selections to suit climate
Control Interface	Supply-temperature and fan-speed options
Installation	Supported indoor mechanical space
Customização	Filter stages, thermal treatment and duct interfaces can be configured for the intended application and operating environment.

Applications

Higher-volume replacement air for clean production support zones, controlled packaging rooms, laboratories and process-exhaust make-up systems.

Solutions for Your Application

Outdoor-air load exceeds the practical component area of a smaller flat unit.The 849 mm width and 441 mm depth provide a larger treatment bay for the selected duty.

A dedicated supply unit must integrate with an independently balanced exhaust system.Use fan-speed control and airflow measurement provisions to establish the intended room pressure balance.

Opções disponíveis

Fine filters, heating and cooling coils, electric heat, freeze protection, airflow sensing, fan-speed control and flexible duct connectors are available.

Planning a Fresh Air Handling Unit 1497 × 849 mm specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe