STjh compact 400 by 336 by 400 mm stainless transfer hatch with acrylic door and shallow wall flange

STJH-CLEANROOM-TRANSFER-HATCH-400X336X400

Cleanroom Transfer Hatch 400 × 336 × 400 mm

The smallest standard transfer hatch for sealed samples, small tools and packs crossing a controlled wall.

400 mm square transfer face
336 mm shallow chamber depth
Mechanical door interlock

Introdução do produto

This compact hatch uses a 400 mm square face and 336 mm transfer depth to limit its wall footprint. A double-skin stainless body, opposing hinged doors and mechanical interlock create a straightforward transfer route for small sealed loads. Standard unsealed doors allow a slight clean-side pressure flush, while flange arrangements support flush or projecting installation.

Características-chave

Minimal wall demand

The compact face fits laboratory partitions where larger hatches would conflict with benches or services.

Simple interlocked operation

The mechanical system blocks simultaneous door opening without complex controls.

Flexible wall position

Installation flanges can suit flush or projecting placement through common cleanroom wall systems.

Parâmetros técnicos

Nominal Dimensions	400 W x 336 D x 400 H mm
Body Construction	Double-skin 1.5 mm stainless steel
Standard Material	304 stainless steel
Optional Material	316 stainless steel
Door Type	Manual hinged opposing doors
Interlock	Mechanical one-door-at-a-time
Window Options	Acrylic or stainless-framed safety glass
Installation	Flush or projecting wall flanges
Pressure Behavior	Small clean-side flush with standard unsealed doors
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Applications

For vials, sample packs, small instruments and sealed consumables transferred between laboratory support space and a cleanroom. Check the largest load diagonal because the compact square opening is intended for hand-carried items rather than totes.

Solutions for Your Application

Benchwork and utilities leave little clear partition area.Use the 400 mm face and select the flange projection that clears the adjacent finishes.

Operators may attempt to open both sides during a handoff.The mechanical interlock enforces sequential door use without relying on a powered controller.

Opções disponíveis

Select 304 or 316 stainless steel, acrylic or safety-glass doors, flange depth, door handing and sealed-door upgrades. Interior shelves can be added when the load height permits.

Planning a Cleanroom Transfer Hatch 400 × 336 × 400 mm specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe