STjh DN50 0.75 kW chilled-water circulation pump with a compact inline casing and short motor on white.

STJH-CHILLED-WATER-CIRCULATION-PUMP-DN50-075KW

Chilled-Water Circulation Pump DN50 0.75 kW

A compact DN50 inline chilled-water pump with a 0.75 kW motor and lower 150 hydraulic head class for local coil branches.

DN50 inline body
0.75 kW motor
150 hydraulic head class

Solicite um orçamento. Browse produtos

Introdução do produto

This smallest DN50 pump uses a 0.75 kW motor and compact 150-class hydraulic for laboratory AHU coils and low-resistance branches. The inline format fits directly between matched flanges while the 16 bar working-pressure class supports common closed chilled-water systems.

Características-chave

Small branch duty

The compact impeller and motor match a local coil circuit rather than a high-resistance distribution main.

Inline installation

Suction and discharge share the same pipe axis, reducing base and elbow requirements.

Closed-loop pressure rating

A 16 bar maximum working-pressure class fits many commercial chilled-water networks.

Parâmetros técnicos

Flange Size	DN50
Motor Power	0.75 kW
Hydraulic Head Class	150
Maximum Working Pressure	16 bar
Pump Type	Inline centrifugal
Speed Control	Electronic variable-speed option
Fluid Service	Closed chilled-water circuit
Motor Arrangement	Compact vertical inline
Installation	Pipe-mounted with required support
Customização	Duty point, controls and connection accessories can be configured for the intended application and operating environment.

Applications

Small cleanroom chilled-water branches, laboratory AHU coils, terminal cooling circuits and local process heat exchangers.

Solutions for Your Application

An oversized high-head pump wastes energy and makes coil-valve control unstable.Select the 0.75 kW 150-class hydraulic at the verified branch flow and pressure loss.

Pipe strain can damage a compact inline pump.Support adjacent piping independently and align the DN50 flanges before tightening.

Opções disponíveis

Variable-speed drive, differential-pressure sensor, isolation valves, check valve, flexible connectors, insulation shell and monitoring contacts are available.

Planning a Chilled-Water Circulation Pump DN50 0.75 kW specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe