Complete single-glazed cleanroom partition in a slim aluminum frame

Sistemas de parede e teto para sala limpa

Partição Cleanroom Single-Glass

A room-height partition formed from 12 mm toughened safety glass in a slim aluminum perimeter frame, designed to add visibility and borrowed light without the bulk of a twin-pane wall.

12 mm Toughened Safety Glass
Room-Height Transparent Wall
Slim 50 mm Glazing Frame
Silicone-Sealed Glass Edges

Solicite um orçamento. Browse produtos

Introdução do produto

Single-Glazed Cleanroom Partitions combine one thick safety-glass pane with a profiled aluminum frame that connects directly to adjacent modular wall panels. Replaceable snap-on covers retain the pane, and clear silicone closes the perimeter and glass-to-glass joints. The resulting partition has fewer layers and a narrower visual profile than double glazing, making it suitable where teams need open sightlines and daylight but do not require an enclosed inter-pane cavity.

Características-chave

A single uninterrupted pane preserves clear views across production and circulation areas.

Toughened glass provides higher impact tolerance than ordinary annealed glazing.

Slim framing increases the transparent area within each wall module.

Snap-on retaining covers allow damaged glass to be changed without replacing neighboring panels.

Silicone perimeter seals close narrow ledges that would otherwise collect dust.

Soluções para sua aplicação

Buyers assess safety-glass selection, deflection at full height, edge cleanability and replacement access.

Ordinary thin glazing may flex excessively in a tall cleanroom wall.A 12 mm toughened pane and four-sided aluminum frame create a stiffer room-height module.

Wide mullions interrupt supervision and reduce natural light between rooms.The slim glazing frame leaves most of the module transparent while retaining the pane perimeter.

Exposed glazing beads and rough silicone lines become difficult-to-wipe edges.Snap-on covers and controlled sealant joints form a continuous cleanable border.

Replacing a broken pane can disturb an entire fixed glass wall.Removable retaining profiles give direct access to the affected glass module.

Aplicações típicas

Electronics production viewing wallsResearch laboratory partitionsSuítes de montagem de dispositivos médicosClean manufacturing visitor corridorsQuality-control and inspection rooms

Parâmetros técnicos

Typical dimensions for a framed single-glazed cleanroom wall are shown below.

Material principal	N/A — single 12 mm toughened safety-glass pane
Painel de espessura	50 mm glazing-frame depth
Largura efetiva	1200 mm standard module
Comprimento máximo	3000 mm maximum partition height
Aço enfrentando espessura	N/A — glazed partition has no steel facing
Densidade Core	N/A — monolithic glass construction has no cellular core
Condutividade térmica	N/A — single glazing is selected for visibility rather than thermal insulation
Superfície acabado	Clear, frosted or tinted 12 mm toughened glass with powder-coated aluminum frame
Tipo conjunto	Clear silicone glass joint within four-sided aluminum frame and 30 × 33 mm wall connector
Customização	Disponível com base na aplicação pretendida e ambiente operacional

Opções disponíveis

Frosted privacy glassTinted safety glassLow-UV glazing filmPrinted manifestation or custom graphics

Planning a Single-Glazed Cleanroom Partition specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe