Inglês
Portuguêsatual
Espanhol
Língua malaia
Língua indonésia
Alemão
Língua turca
Vietnã
Francês
Língua russa
Língua árabe
Tailandês
Japonês
Coreano
Controle de sala limpa e sistemas de monitoramento ambiental
Sensor de oxigênio
A fixed electrochemical oxygen monitor that warns of oxygen depletion or enrichment near inert-gas and process-gas use areas.
- Electrochemical O₂ Measurement
- Local Concentration Display
- Dual Alarm Relays
- Replaceable Sensor Cell
Introdução do produto
The oxygen depletion sensor continuously samples surrounding air through a protected diffusion cap. An electrochemical cell produces a signal proportional to oxygen partial pressure, and internal electronics display the concentration and compare it with independent alarm thresholds. Local sounder and beacon functions can be supplemented by relay, current or digital outputs to a central alarm system. The replaceable cell and accessible calibration interface support planned maintenance without replacing the wall-mounted transmitter body.
Características-chave
A bright local display shows oxygen concentration before and during an alarm condition.
Separate low and high alarm thresholds address depletion and enrichment risks.
Replaceable sensing cells extend transmitter service life and simplify maintenance planning.
Soluções para sua aplicação
Oxygen hazards can develop without odor or visible warning, so room coverage, alarm visibility and sensor maintenance must be deliberate.
Inert-gas leakage displaces oxygen without giving occupants a sensory warning.Continuous oxygen measurement activates visible and audible alarms before entry or exposure continues.
A sensor mounted too high misses heavier or poorly mixed displacement patterns.Risk-based mounting positions place detectors near credible gas accumulation and breathing zones.
An aged electrochemical cell loses response gradually.Planned bump checks, calibration and replaceable cells maintain response confidence.
A local alarm is not seen from outside the room.Relay and network outputs drive corridor beacons, central annunciation and ventilation actions.
Aplicações típicas
Nitrogen-supplied cleanroomsCryogenic storage support areasGas cabinet roomsLaboratory inert-gas zones
Parâmetros técnicos
Typical construction values for a fixed oxygen depletion sensor are listed below.
| Material principal | Replaceable electrochemical oxygen cell in polycarbonate transmitter with stainless protective sensor guard |
|---|---|
| Painel de espessura | 55-90 mm detector depth |
| Largura efetiva | 110-180 mm housing width |
| Comprimento máximo | Up to 240 mm detector height |
| Aço enfrentando espessura | 0.5-1.0 mm stainless sensor guard |
| Densidade Core | 1180-1220 kg/m³ for polycarbonate transmitter body |
| Condutividade térmica | 0.19-0.22 W/(m·K) for polycarbonate enclosure material |
| Superfície acabado | White or safety-yellow housing with black display, green normal light and red alarm beacon |
| Tipo conjunto | Wall-mount base with diffusion sensor cap, cable gland and removable alarm terminals |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Local sounder and beaconLow and high oxygen alarmsAnalog and relay outputsRemote corridor indicator
Planning a Oxygen Sensor specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
