Inglês
Portuguêsatual
Espanhol
Língua malaia
Língua indonésia
Alemão
Língua turca
Vietnã
Francês
Língua russa
Língua árabe
Tailandês
Japonês
Coreano
Fluxo laminar e equipamentos de contenção
Hood de fluxo laminar móvel
Recinto móvel de ar limpo que pode ser posicionado sobre uma mesa ou instrumento compacto para fornecer proteção temporária do produto por filtragem.
- Lockable Mobile Frame
- Compact Fan-Filter Module
- Clear Flexible Enclosure
- Roll-Over Process Positioning
Introdução do produto
This hood combines a light tubular frame, fan-filter module and clear side enclosure on cleanroom-compatible casters. The open lower frame can straddle a fixed workbench or small machine, allowing the filtered zone to be brought to the process rather than moving the process itself. Locking casters and leveling pads stabilize the unit during use. The hood is intended for temporary non-hazardous product protection and is connected to facility power at its operating position.
Características-chave
Non-marking locking casters secure the hood after positioning.
Clear side panels show the process while restricting lateral room drafts.
A top fan-filter module keeps the lower access area free of equipment.
Quick-release curtain or panel mounts simplify relocation and cleaning.
Soluções para sua aplicação
A movable hood must pass through doors, clear installed equipment and remain stable enough for repeatable airflow at the destination.
Sensitive equipment cannot be moved to a fixed clean bench.The open lower frame rolls over the installed process location.
Caster movement changes the working height.Locking casters and adjustable pads stabilize the frame at its final position.
A wide hood cannot pass through standard doorways.A narrow modular frame and removable panels support controlled relocation.
Loose curtains contact the process during movement.Quick-release curtains can be secured or removed before the hood is rolled.
Aplicações típicas
Temporary clean assemblyInstrument maintenance under filtered airBatch changeover protectionClean component staging
Parâmetros técnicos
Typical configurable construction ranges for a mobile laminar flow hood are listed below.
| Material principal | Anodized aluminum tubular frame with powder-coated steel fan-filter housing and clear PVC or polycarbonate panels |
|---|---|
| Painel de espessura | 20-40 mm framed enclosure sections |
| Largura efetiva | 800-1800 mm clear protected width |
| Comprimento máximo | Up to 2400 mm overall mobile height |
| Aço enfrentando espessura | 0.8-1.0 mm powder-coated fan-filter housing |
| Densidade Core | Aproximadamente 1200 kg/m³ para painéis de invólucro de policarbonato sólido |
| Condutividade térmica | 0,19-0,22 W/(m · K) para painéis de policarbonato |
| Superfície acabado | Natural anodized frame, white filter housing and clear cleanroom-grade enclosure panels |
| Tipo conjunto | Quick-release modular frame with gasketed fan-filter mount and lockable caster bases |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Rigid or flexible side panelsBattery-backed fan operationHeight-adjustable frameAntistatic clear curtains
Planning a Mobile Laminar Flow Hood specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
