Inglês
Portuguêsatual
Espanhol
Língua malaia
Língua indonésia
Alemão
Língua turca
Vietnã
Francês
Língua russa
Língua árabe
Tailandês
Japonês
Coreano
Fluxo laminar e equipamentos de contenção
Fluxo Laminar Canopy
Cobertura superior independente de ar limpo que cobre uma mesa de trabalho ou máquina de processo, mantendo acesso aberto ao redor da zona protegida.
- Open Process Access
- Freestanding Overhead Frame
- Uniform HEPA Downflow
- Configurable Curtain Sides
Introdução do produto
The canopy uses a floor-supported frame to carry a filtered overhead plenum above existing equipment. Its open sides permit carts, operators and maintenance tools to approach the process, while optional flexible curtains can be added where room drafts need greater control. Leveling feet and adjustable cross-members align the diffuser above the working footprint. Unlike a ceiling-suspended hood, the canopy transfers its load directly to the floor and can be repositioned after controlled disassembly.
Características-chave
Open sides give technicians direct access to installed process equipment.
The overhead plenum can be sized to the actual clean-air footprint rather than the room area.
Leveling feet stabilize the frame on cleanroom floors with minor variation.
Optional flexible curtains reduce lateral mixing without creating permanent walls.
Soluções para sua aplicação
A local clean-air zone must fit around existing process equipment while keeping its support frame stable and outside normal operator movement.
The ceiling cannot carry a suspended filter plenum.A floor-supported aluminum or stainless frame carries the complete canopy load.
Permanent walls block maintenance access to the machine.Open sides and removable curtains preserve full process access.
A standard canopy does not match an irregular equipment footprint.Modular cross-members and filter sections follow the selected process dimensions.
Uneven floors twist the overhead diffuser plane.Adjustable leveling feet and bolted frame corners allow final alignment.
Aplicações típicas
Aseptic component stagingOpen filling-point protectionMedical-device assembly cellsClean inspection islands
Parâmetros técnicos
Typical configurable construction ranges for a freestanding laminar flow canopy are listed below.
| Material principal | Anodized aluminum or SUS304 support frame with powder-coated steel plenum and aluminum honeycomb diffusers |
|---|---|
| Painel de espessura | 50-100 mm overhead plenum and diffuser sections |
| Largura efetiva | 1500-4000 mm protected process width |
| Comprimento máximo | Up to 6000 mm canopy length |
| Aço enfrentando espessura | 0.8-1.2 mm powder-coated steel plenum skins |
| Densidade Core | 30-50 kg/m³ aluminum honeycomb diffuser core |
| Condutividade térmica | 1.5-2.5 W/(m·K) across the diffuser-panel assembly |
| Superfície acabado | White powder-coated overhead plenum with natural anodized or brushed stainless frame |
| Tipo conjunto | Bolted modular support frame with gasketed fan-filter modules and sealed plenum flanges |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Clear PVC strip curtainsRemote fan-filter controlsIntegrated LED lightingMobile lockable base frame
Planning a Laminar Flow Canopy specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
