Inglês
Portuguêsatual
Espanhol
Língua malaia
Língua indonésia
Alemão
Língua turca
Vietnã
Francês
Língua russa
Língua árabe
Tailandês
Japonês
Coreano
Equipamento de sala limpa específico da indústria
Estação de Limpeza Foam
A mobile stainless station that meters detergent into a dense foam stream for controlled open-plant cleaning.
- Mobile Stainless Chassis
- Adjustable Chemical Induction
- Food-Grade Hose and Lance
- Foam and Rinse Operation
Introdução do produto
The foam cleaning station packages a chemical injector, pressure controls and hose management on a compact stainless trolley. It draws concentrated detergent from a protected container and mixes it with the incoming water or air stream to produce clinging foam through a dedicated lance. Large wheels, an ergonomic handle and washable open-frame construction support frequent sanitation across wet production zones.
Características-chave
A long food-grade hose extends the cleaning radius without moving the trolley repeatedly.
The stainless chassis resists routine wet cleaning and exposes key parts for service.
Separate foam lance and rinse selection support staged sanitation procedures.
Soluções para sua aplicação
Manual detergent spreading is inconsistent and often wastes chemical during open-plant cleaning.
Thin detergent solution runs off vertical equipment too quickly.The injector and foam lance create a clinging blanket that extends surface contact.
Fixed cleaning points leave distant equipment difficult to reach.The wheeled chassis and long hose bring controlled foaming closer to each work zone.
Operators may mix chemical at inconsistent strength.A metered pickup circuit provides repeatable dilution within the selected setting.
Complex equipment traps soil during cleanup.The open stainless frame and accessible hose connections simplify external rinsing and inspection.
Aplicações típicas
Food and beverage processing roomsMeat and seafood productionDairy and bakery washdownHigh-care equipment sanitation
Parâmetros técnicos
Typical configurable construction values for a mobile foam cleaning station are listed below.
| Material principal | 304 stainless-steel trolley with chemical-resistant pump, seals, hose and lance |
|---|---|
| Painel de espessura | 25-40 mm folded stainless enclosure sections |
| Largura efetiva | 450-650 mm mobile chassis width |
| Comprimento máximo | Up to 1100 mm trolley and handle envelope |
| Aço enfrentando espessura | 1.2-2.0 mm stainless housing and guards |
| Densidade Core | 7950-8050 kg/m³ para construção em aço inoxidável |
| Condutividade térmica | 14-16 W/(m · K) para aço inoxidável austenítico |
| Superfície acabado | Brushed hygienic stainless with blue food-grade hose and black chemical-resistant grips |
| Tipo conjunto | Sanitary threaded hose couplings with clamped pump lines and welded trolley frame |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Single- or dual-chemical pickupIntegrated hose reelAir-assisted or water-powered foamingAlternative lance and nozzle lengths
Planning a Foam Cleaning Station specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
