Inglês
Portuguêsatual
Espanhol
Língua malaia
Língua indonésia
Alemão
Língua turca
Vietnã
Francês
Língua russa
Língua árabe
Tailandês
Japonês
Coreano
Sistemas de parede e teto para sala limpa
Perfil de canto externo arredondado da sala limpa
A convex aluminum corner cover that protects projecting cleanroom edges while providing a smooth radiused surface for cleaning and contact safety.
- Convex 50 or 70 mm radius
- Covers vulnerable projecting corners
- Concealed backing and clip-on face
- Smooth powder-coated aluminum finish
Introdução do produto
The External Rounded Cleanroom Corner Profile wraps outward-facing wall returns, columns and enclosure corners with a continuous convex radius. Unlike a square angle trim, it removes the sharp exposed edge that is most likely to be struck by carts or personnel. A concealed fixing base supports the curved aluminum cover, producing a resilient, wipeable surface with no prominent screw heads on the room side.
Características-chave
The rounded face deflects glancing contact better than a thin square edge.
Concealed attachment hardware maintains a smooth visible surface.
Extruded aluminum keeps the radius consistent from end to end.
Sealable perimeter edges close the transition to adjacent wall panels.
Soluções para sua aplicação
Projecting corners receive direct contact and are highly visible, so they need protection without introducing bulky, difficult-to-clean guards.
Sharp outside corners can damage garments or cause discomfort when accidentally contacted.The convex radius replaces the narrow edge with a wider, smoother contact surface.
Cart traffic chips coatings at exposed wall returns.A continuous aluminum cover shields the panel edges beneath the corner profile.
Surface-mounted corner guards often leave visible screws and ledges.The curved cover clips over a hidden base, keeping the exposed face uncluttered.
Hand-finished external radii vary along tall wall and column corners.A precision extrusion maintains a repeatable curve over the full profile length.
Aplicações típicas
External corners of cleanroom partitionsColumn and pilaster enclosuresTrolley routes and material airlocksEquipment housing cornersDoor recess external returns
Parâmetros técnicos
The external rounded profile is identified by its convex radius. It is not the square 90-degree external angle listed separately in this product range.
| Material principal | 6063 aluminum external cove face with concealed backing profile |
|---|---|
| Painel de espessura | N/A — not applicable to an external rounded trim |
| Largura efetiva | 50 or 70 mm external corner radius |
| Comprimento máximo | 3000 mm |
| Aço enfrentando espessura | N/A — not applicable to an aluminum corner profile |
| Densidade Core | N/A-sem núcleo isolado; a densidade da liga de alumínio é de aproximadamente 2700 kg/m³ |
| Condutividade térmica | N/A-sem núcleo isolado; liga de alumínio é de aproximadamente 200 W/(m · K) |
| Superfície acabado | White powder-coated or anodized aluminum |
| Tipo conjunto | Clip-on convex cover over a concealed external-corner backing section |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
50 mm convex radius70 mm convex radiusWhite powder-coated finishExternal end and transition pieces
Planning a External Rounded Cleanroom Corner Profile specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
