Complete stainless cleanroom linear drain in diagonal three-quarter view

Equipamentos de drenagem, higiene e segurança da sala limpa

Cleanroom Linear Drain (em inglês)

Narrow stainless linear channel for collecting wash water along cleanroom walls, equipment lines or room thresholds.

Continuously Welded Channel
Built-In Drainage Fall
Removable Hygienic Grating
Configurable Outlet Positions

Introdução do produto

The cleanroom linear drain uses a continuously welded 304 or 316L stainless channel to collect wash water along an extended floor edge. A controlled internal fall directs liquid toward one or more outlets, while sectional removable grates expose the radiused channel for cleaning. Edge and flange profiles can be matched to resin, vinyl or tiled floor systems without leaving unnecessary exposed joints.

Características-chave

A built-in longitudinal fall reduces ponding along extended runs.

Sectional removable grates provide access to the complete channel interior.

Radiused stainless surfaces limit sharp internal residue traps.

Outlet quantity and position can be arranged around room drainage routes.

Soluções para sua aplicação

Long wet boundaries require consistent floor collection without standing water, inaccessible channel sections or weak joints between drain modules.

A level channel can leave water standing at the end of a long wash-down run.A fabricated internal fall directs flow toward the selected outlet positions.

Fixed covers prevent complete inspection of long drain interiors.Lift-out sectional grates expose the full radiused channel for cleaning.

Numerous field joints can create leakage and residue-retention points.Factory-welded sections minimize joints, with flanged connections reserved for transport-length modules.

Floor finishes need different edge and waterproofing details.Resin, vinyl and tile flange profiles are available for the intended floor build-up.

Aplicações típicas

Cleanroom wash baysProcess-skid perimetersFill-finish support roomsHygienic corridors and thresholds

Parâmetros técnicos

Typical ranges for a hygienic stainless linear channel are listed below; run length, fall, grate and outlet layout are selected for flow and floor construction.

Material principal	AISI 304 or 316L stainless steel channel
Painel de espessura	1.5-2.0 mm channel wall
Largura efetiva	80-300 mm clear channel width
Comprimento máximo	Up to 6000 mm per fabricated section
Aço enfrentando espessura	1.5-2.0 mm exposed stainless surfaces
Densidade Core	7900 - 8000 kg / m3 para aço inoxidável
Condutividade térmica	14 - 16 W / (m · K) para aço inoxidável
Superfície acabado	Satin, pickled and passivated, or electropolished stainless steel
Tipo conjunto	Continuously welded channel with optional flanged transport-section joints
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Grau 304 ou 316LSlot or ladder grate500-6000 mm fabricated sectionsEnd, bottom or side outlets

Planning a Cleanroom Linear Drain specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe