Inglês
Portuguêsatual
Espanhol
Língua malaia
Língua indonésia
Alemão
Língua turca
Vietnã
Francês
Língua russa
Língua árabe
Tailandês
Japonês
Coreano
Fluxo laminar e equipamentos de contenção
Estação de descarga de sacos de sala limpa
Estação de esvaziamento de sacos em aço inoxidável que capta a poeira enquanto os sacos são abertos e esvaziados através de uma grade de segurança para um funil receptor ou linha de processo.
- Enclosed Bag-Opening Hood
- Rear Dust Extraction
- Safety Grate and Hopper
- Empty-Bag Disposal Option
Introdução do produto
The bag dump station combines a waist-height hopper, hinged access hood and local extraction plenum. Operators place a sack on the loading shelf, open it inside the hood and empty material through a removable safety grate. Dust displaced from the hopper is drawn toward rear filters rather than into the operator's breathing zone. A side bag compactor, continuous liner or waste port can remove empty sacks without carrying residue back across the clean area.
Características-chave
Rear extraction captures the dust plume directly above the hopper opening.
A removable safety grate prevents large packaging pieces from entering the process.
The hopper and ledges use radiused stainless geometry for cleaning access.
Optional empty-bag disposal keeps packaging residue within a defined route.
Soluções para sua aplicação
Opening and collapsing bags releases dust at the same point where the receiving hopper displaces air upward.
A powder plume rises as the sack enters the hopper.Rear extraction captures displaced air immediately above the loading grate.
Bag fragments can fall into the process.A removable safety grate intercepts large packaging pieces before the hopper.
Operators carry dusty empty sacks through the room.A side disposal port or compactor contains the empty-bag route.
Powder remains in sharp hopper corners.Radiused welded stainless transitions improve access for wipe-down or wash-down.
Aplicações típicas
Powder ingredient chargingGranule sack emptyingTablet excipient additionClean-process hopper feeding
Parâmetros técnicos
Typical configurable construction ranges for a cleanroom bag dump station are listed below.
| Material principal | SUS304 or SUS316L welded hopper, loading shelf and hood with a powder-coated or stainless filter enclosure |
|---|---|
| Painel de espessura | 30-60 mm double-skin hood and filter sections |
| Largura efetiva | 800-1500 mm clear bag-loading width |
| Comprimento máximo | Up to 2200 mm overall station depth |
| Aço enfrentando espessura | 1.5-3.0 mm stainless hopper; 1.0-1.5 mm hood panels |
| Densidade Core | Approximately 7900 kg/m³ for stainless structural components |
| Condutividade térmica | 14-16 W/(m · K) para aço inoxidável austenítico |
| Superfície acabado | Fine-brushed or electropolished stainless steel with radiused welded hopper surfaces |
| Tipo conjunto | Continuously welded hopper with gasketed access hood, removable grate and flanged process outlet |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Integrated bag compactorContinuous liner empty-bag portVibratory hopper aidLocal or remote dust collector
Planning a Cleanroom Bag Dump Station specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
