Biosafety containment pass box with sealed stainless body and filter-service housing

Equipamento de descontaminação de pessoal e materiais

Caixa de passagem de contenção de biossegurança

Câmara de transferência selada e com pressão controlada, com exaustão filtrada e recursos de manutenção, destinada aos limites de biossegurança.

Sealed Containment Chamber
Filtered Exhaust Path
Casa de filtro de mudança segura
Pressure-Gated Doors

Solicite um orçamento. Browse produtos

Introdução do produto

This containment pass box controls material movement between a biological work area and an adjacent support space. The welded chamber operates with a selected pressure bias, while exhaust passes through a high-efficiency final filter housed in a service enclosure. Sealed penetrations, pressure indication and one-door-at-a-time logic support a defined containment boundary.

Características-chave

A negative pressure bias directs small leakage towards the exhaust path.

A safe-change housing isolates the used final filter during service.

Differential-pressure indication makes chamber status visible.

Capped ports support compatible chamber treatment connections.

Coved internal welds simplify chemical wipe-down.

Soluções para sua aplicação

Biosafety transfer must maintain leakage direction, protect maintenance personnel and preserve the barrier at every door movement.

Aged gaskets allow air to escape to the adjacent room.A controlled negative bias draws leakage inward to the filtered exhaust route.

Service staff are exposed while replacing a loaded filter.A safe-change enclosure contains the filter during removal and replacement.

Operators cannot see whether the pressure bias is established.A differential-pressure display and door permissive show the chamber state.

Cable penetrations bypass the sealed enclosure.Welded sleeves and capped pressure-tight ports retain the chamber boundary.

Aplicações típicas

Biosafety laboratoriesVaccine development supportAnimal containment roomsBiological sample logistics

Parâmetros técnicos

Representative construction ranges for a biosafety containment pass box are shown below.

Material principal	Welded SUS 316L chamber with pressure-control fan, HEPA exhaust filter and safe-change service housing
Painel de espessura	100-180 mm sealed service-plenum construction
Largura efetiva	500-1100 mm clear chamber width
Comprimento máximo	Profundidade da câmara de até 1500 mm
Aço enfrentando espessura	1.2-2.0 mm SUS 316L chamber facing
Densidade Core	35-40 kg/m³ polyurethane insulation within external service panels
Condutividade térmica	0.022-0.028 W/(m·K) for polyurethane service-panel insulation
Superfície acabado	Electropolished or satin SUS 316L with coved welds and chemical-resistant door seals
Tipo conjunto	Continuously welded pressure-tight chamber with compression doors and safe-change filter enclosure
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Bag-in/bag-out filter housingPressure-decay test portsChamber-treatment connection portsBattery-backed interlock release

Planning a Biosafety Containment Pass Box specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe