Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Wall & Ceiling Systems / Double MgO Rock Wool Cleanroom Panel 50 mm Machine-Made
zhengfeng-DOUBLE-MGO-ROCK-WOOL-CLEANROOM-PANEL-50-MACHINE

Double MgO Rock Wool Cleanroom Panel 50 mm Machine-Made

A compact machine-made sandwich backs both metal faces with mineral boards.
  • Smooth coated metal provides an accessible surface for routine wiping.
  • Tongue-and-groove edges locate adjacent panels during assembly.
Request a Quote Browse Products

A compact partition backed on both sides

This 50 mm machine-made panel places a rock-wool core between two MgO boards and coated steel faces. The mineral boards back both surfaces, while the bonded layered construction forms the wall component. It suits repetitive partition runs where the same section and interlocking edge geometry can be used across several modules.

Understand what fits inside 50 mm

The overall thickness includes the metal skins, both boards and the rock wool. With approximately 5 mm board layers as a reference selection, the insulation core is thinner than the total panel depth. Core density, board thickness and face gauge should therefore be stated independently rather than treating 50 mm as the rock-wool thickness.

Reference effective widths are 950 or 1150 mm, with 0.3–0.6 mm metal faces. The rock-wool selection range is 100–140 kg/m³, subject to the approved build-up. A higher density or an extra board does not by itself establish allowable wall height, fixing pull-out strength or a fire rating. The bonds and joints must transfer loads through the complete section.

Interlocking edges locate, seals close

Tongue-and-groove edges help align adjacent pieces, but their engagement is separate from the seal needed to control air leakage and keep cleaning liquid out. Set out the first panel accurately because dimensional errors accumulate over a long run. Factory lengths should follow a verified wall elevation, including head clearance and the chosen floor and ceiling details.

Plan services before cutting. A hole removes part of the faces and internal boards and needs an appropriate framed or sealed termination. Heavy attachments should use designed reinforcement or independent supports rather than relying on a screw through the skin into MgO.

Material evidence and handover

Specify the actual MgO board formulation and evidence for moisture movement and compatibility with adjacent metal under the intended environment. A generic mineral-board name does not establish wet-service behaviour. Keep material dry during storage and close exposed edges after fabrication.

The quotation should identify panel quantities, build-up, coating, joint components, openings, tracks and seals. Acceptance includes dimensions, face condition, bond evidence, joint fit and the required assembly performance records. During service, investigate loose skins, cracks or moisture staining before resealing; the visible metal finish may conceal a damaged inner layer.

Planning your Double MgO Rock Wool Cleanroom Panel 50 mm Machine-Made specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us