Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Wall & Ceiling Systems / Double-Glazed Cleanroom Partition Manual-Blind Full-Height
zhengfeng-DOUBLE-GLAZED-CLEANROOM-PARTITION-50-MANUAL-BLIND

Double-Glazed Cleanroom Partition Manual-Blind Full-Height

Enclosed manual shading needs a defined control type and privacy expectation.
  • The blind remains enclosed between panes instead of hanging inside the room.
  • Local manual operation provides direct control beside the work area.
  • Slats provide adjustable screening across the tall glazed opening.
Request a Quote Browse Products

Local screening inside a full-height glazed partition

This nominal 50 mm double-glazed wall configuration contains a manually operated blind between the panes. It suits observation areas that sometimes need visual screening. Enclosing the slats keeps them out of the occupied room, while staff operate the selected control at the viewing bay.

Manual systems differ. Some only tilt slats; others also raise and lower the blind. Controls may use a knob, slider or magnetic coupling, depending on the supplied unit. Specify the required operation and reachable control position before deciding that the blind meets the intended privacy task.

Check the blind and glass size as one selection

Project inputReason
50 mm overall wall depthThe available blind cavity remains smaller than the overall module.
Opening height and widthGlass loads and blind operating limits must both suit the actual dimensions.
Manual control locationAllow staff to reach it without leaning over equipment or obstructing cleaning.
Slat finish and viewing requirementAssess screening under actual lighting rather than assuming total blackout.

A full-height unit also needs appropriate impact glazing, base support and head movement allowance. The blind does not change the required structural assessment. Closed slats can leave light gaps and silhouettes; where privacy is critical, assess the complete sample from both sides at the expected viewing angles.

Plan maintenance of the control and sealed unit

The internal blind may be inaccessible without replacing or opening a specialist glazing unit. External controls still require cleaning and inspection. Establish which components can be replaced on site and how a failed mechanism is serviced. Do not force a stiff control or open the cavity without the supplied maintenance procedure.

Quote the glazing, blind function, control hardware, frame, support, seals and installation. Acceptance should verify full intended operation, control accessibility and screening, as well as glass identification and surface alignment. Record the blind model and replacement method with the wall drawings so future service does not compromise the room boundary.

Planning your Double-Glazed Cleanroom Partition Manual-Blind Full-Height specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us