Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Wall & Ceiling Systems / Demountable Cleanroom Wall Panel 117 mm Extra-Tall
zhengfeng-DEMOUNTABLE-CLEANROOM-WALL-PANEL-117-TALL

Demountable Cleanroom Wall Panel 117 mm Extra-Tall

A deeper modular wall section integrates removable infills and a planned concealed wiring route.
  • Tall panels enclose equipment that exceeds conventional room heights.
  • An internal wiring route keeps services within the wall profile.
  • A deeper section for project-specific support and roof connections.
Request a Quote Browse Products

A deeper modular wall for tall equipment layouts

This extra-tall wall concept uses a nominal 117 mm post-and-panel section, corresponding to the 4⅝-inch reference depth of approximately 117.5 mm. Demountable infills form the enclosure face, while an integrated raceway provides space for concealed wiring and selected outlets.

Begin with the equipment height, installation route and maintenance envelope. The usable room height must include clearance for filters, lighting, pipework and servicing above the process. A wall top positioned just above the equipment may leave no practical space for those functions.

Height is a structural design outcome

A deep section can support a different framing design from a slim partition, but thickness alone does not establish a maximum height. Check panel spans, post bending, lateral restraint, pressure loads, anchors and deflection for the selected assembly. Door and conveyor openings interrupt the wall and can change its support requirements.

For a floor-to-ceiling wall, detail relative movement at the existing structure. For a freestanding room, design the roof and its supports as part of the enclosure. A roof interface is not an automatic capacity for equipment or maintenance traffic.

Make concealed wiring maintainable

Schedule cable routes, separation, bend space, outlet boxes and accessible connection points before the infills are installed. The raceway is physical space within the wall, not permission to mix every service or a certification of the electrical installation. Provide bonding or earthing where required by the selected metal assembly and electrical design.

Keep the demounting sequence compatible with services. Avoid fixing equipment across panels that must later be removed, and document which components remain structural. Plan high-level cleaning and panel handling access as well as the initial erection method.

Quote and accept the full enclosure

Include wall height, post spacing, openings, raceway components, top connection, bracing, supports, access equipment and sealing in the quotation. Identify infill material and finish separately from the frame.

Accept alignment, joint closure, service access and structural documentation for the actual geometry. Demonstrate a representative removable section and inspect the restored seals. Cleanroom classification and fire, acoustic or static-control performance need evidence for the selected full construction, not simply the wall depth or concealed wiring feature.

Planning your Demountable Cleanroom Wall Panel 117 mm Extra-Tall specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us