Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Wall & Ceiling Systems / Curved Cleanroom Wall Panel 152 mm Radius Composite Corner
zhengfeng-CURVED-CLEANROOM-WALL-PANEL-R152-COMPOSITE

Curved Cleanroom Wall Panel 152 mm Radius Composite Corner

A broad curve needs the correct face orientation and a matched lining finish.
  • Broader curve allows a continuous wipe path.
  • The thicker reference section suits a coordinated lining build-up.
  • Rigid forming preserves the selected radius along the height.
Request a Quote Browse Products

A broader concave corner for a thicker lining build-up

The nominal 152 mm composite corner creates a six-inch reference radius through a 90-degree turn. A reference 15.875 mm substrate corresponds to a 5/8-inch lining. Its purpose is to make a broad, consistent transition where forcing a flat board into the curve would complicate construction and finishing.

The finish-facing side must match the intended orientation. In a paper-faced configuration, the concave paper layer remains a substrate beneath the joint and coating system, not the final cleanroom surface. Turning the section around changes which surface receives the finish and cannot be assumed acceptable.

Use the larger radius deliberately

A broad curve can improve access for a wiping tool but consumes more corner space. Check nearby outlets, cabinetry and floor coves on the plan. The two tangent transitions should meet the flat wall without ridges; the correct substrate thickness helps, but joint compound and coating also contribute to the finished plane.

Reference itemSelection basis
152.4 mm inner radiusSix-inch substrate geometry; agree the finished radius and tolerance.
15.875 mm sectionMatch the actual adjoining lining instead of assuming all nominal 16 mm boards align.
Flat joining edgesChoose tapered or butt-joint preparation to suit the adjacent board.
Section heightCoordinate supplied lengths, handling and any horizontal joint.

The coating system determines the usable surface

Choose primer, reinforcement and coating for the actual composite substrate and the planned cleaning chemicals. A continuous painted appearance does not establish chemical resistance, low emissions or a fire-resistance period. Demonstrate the finish on a sample with both the curved and adjoining flat materials.

Keep fastenings and joints supported, protect vulnerable edges during installation and inspect the cured surface for cracks or unsealed areas. Repair damage before cleaning liquid reaches the substrate. The quotation should include the curved element, framing, joint work, coating and site finishing. Handover should verify geometry and surface continuity against the approved sample, with any required material or fire evidence specific to the complete wall arrangement.

Planning your Curved Cleanroom Wall Panel 152 mm Radius Composite Corner specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us