Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Air Ducts & Air Distribution / Constant Air Volume Controller DN250 Self-Powered
zhengfeng-CONSTANT-AIR-VOLUME-CONTROLLER-DN250

Constant Air Volume Controller DN250 Self-Powered

A larger self-powered branch regulator controls the combined volume; individual outlets still require a coordinated distribution design.
  • The larger connection suits substantial branches without a small-bore transition.
  • The external setting mechanism remains accessible outside the airstream.
Request a Quote Browse Products

Regulate a larger circular branch at a fixed volume

The DN250 self-powered unit provides a mechanical regulating blade within a larger round airway. Airflow forces, the spring balance and damping arrangement determine the blade position around an externally selected setting. It suits a higher-volume branch with a fixed duty, provided the selected assembly has sufficient pressure authority and an appropriate verified flow range.

A header controller cannot allocate every outlet's flow

When the unit serves several downstream outlets, it regulates their combined volume. Individual outlet flows still depend on branch resistance and balancing. Closing one outlet can redistribute the remaining total to other outlets rather than preserve each original flow. If terminal demand is expected to change independently, review the overall control arrangement before specifying a constant-volume header.

ReferenceRequired decision
250 mm nominal connectionConfirm actual end dimensions, flange option and available installation length.
Mechanical blade, spring and damping elementSelect the flow from documented curves at the actual minimum and maximum pressure difference.
Galvanized casing; stainless optionReview the full internal material set for the air stream, not only the external shell.

The chosen flow band needs verified regulation at both ends. High-end volume can raise velocity and noise; low-end operation may approach the mechanism's regulating limit. The larger bore may reduce velocity for a given flow, but it does not by itself provide a lower operating setpoint or better precision. Include loaded filters and terminal resistance when determining the minimum available pressure.

Distinguish acoustic and control accessories

A downstream silencer can address sound travelling through the duct, while casing treatment addresses a different transmission path. Both add size, and a silencer adds pressure loss that belongs in the selection. Maintain service access to the external setting and enough clearance to inspect the mechanical assembly.

Install without distorting the casing or obstructing the blade. During maintenance, check debris, seals and the relationship between actual branch volume and duct pressure. Rebalance downstream outlets after changes to the distribution network rather than assuming the header will compensate at each terminal.

Define the quoted and accepted duty

Supply the total volume, downstream arrangement, available pressure range, acoustic target and environmental conditions. Quote connection flanges, attenuation and material options explicitly. Handover should include the supplied unit's flow data, recorded setpoint and measurements of both the header and critical outlets under agreed conditions. Room classification and containment require separate system acceptance.

Planning your Constant Air Volume Controller DN250 Self-Powered specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us