Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Air Ducts & Air Distribution / Constant Air Volume Controller DN160 Self-Powered
zhengfeng-CONSTANT-AIR-VOLUME-CONTROLLER-DN160

Constant Air Volume Controller DN160 Self-Powered

A mid-size mechanical regulator maintains a selected branch duty, with optional setpoint switching specified separately.
  • The larger bore serves medium ventilation branches.
  • A mechanical setpoint avoids continuous powered control for fixed-flow duty.
Request a Quote Browse Products

Maintain a fixed medium-branch duty mechanically

The DN160 constant-volume controller combines a round casing with a pressure-responsive blade, spring and external setting mechanism. As pressure rises, the mechanism increases resistance to limit the resulting change in volume. This is useful for a branch with a genuinely fixed design duty; it does not reset the airflow automatically in response to occupancy or room conditions.

Choose the setpoint and pressure envelope together

Selection starts with the required volume and the lowest pressure available at the controller when the system is fully loaded. A regulator that remains fully open has no further ability to compensate for insufficient pressure. At high pressure, a more closed blade may achieve the volume while producing unacceptable sound. Compare both duct-borne and casing-radiated noise where the unit is above an occupied area.

Reference constructionDesign consequence
160 mm nominal circular connectionSize from the operating volume and acoustic criterion, not connection diameter alone.
Galvanized casing and mechanical adjustmentSet permitted air conditions and maintain access to the scale.
Optional setpoint switchingDefine two settings, control wiring and the state on loss of power if an actuator is selected.

The basic pressure response is self-powered; an optional switching actuator is a separate electrical function. Do not assume that adding an actuator provides measured-flow feedback, a room-pressure loop or a safety shut-off. The exact adjustment range, temperature limits and flow tolerance require evidence for the supplied assembly rather than a generic percentage of nominal flow.

Integrate with the branch and its maintenance plan

Allow the approved inlet arrangement and check flow direction. Support the adjoining duct without twisting the housing. Keep acoustic cladding, vapour barriers and ceiling framing clear of the setting and actuator service space. End seals address joint leakage; they do not establish blade shut-off tightness.

During service, compare the recorded setting with measured volume and available pressure. Contamination on the blade or damage to the damping element can affect movement. Investigate those causes before increasing fan pressure, which may make other branches noisier. Schedule suitable access where the branch handles particulate-laden extract air.

Quotation and acceptance

Submit normal and alternative setpoints, pressure extremes, air composition, connection details and sound limits. Include any switching actuator, seals and acoustic treatment in the quoted scope. Require model-specific selection data and demonstrate the agreed flow tolerance across relevant system states. A stable branch volume is one input to room balance, not proof of a maintained cleanroom pressure difference.

Planning your Constant Air Volume Controller DN160 Self-Powered specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us