Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Flooring / Conductive Epoxy Flooring Chemical-Resistant Broadcast
zhengfeng-CONDUCTIVE-EPOXY-FLOORING-CH25

Conductive Epoxy Flooring Chemical-Resistant Broadcast

A textured composite floor using a specified silicon-carbide broadcast and chemical-resistant finish, with conductivity assessed after the final seal.
  • Nominal 2.0–2.5 mm composite build
  • Specified silicon-carbide broadcast texture
  • Final sealed assembly tested for static control
Request a Quote Browse Products

A conductive floor with a sealed mineral texture

CH25 combines a conductive epoxy construction with a specified silicon-carbide broadcast and a chemical-resistant finishing layer. The nominal 2.0–2.5 mm composite build is intended for process areas that need more surface texture than a smooth conductive coating. It may suit chemical handling, battery production or utility spaces when the actual exposure and electrical requirements match the selected system.

The layers have different jobs. The base supports the broadcast, the aggregate creates a durable profile, and the finishing coat controls exposed texture and liquid contact. Grounding connections and the underlying conductive arrangement provide the intended route for charge. Their combined behaviour matters more than a list of individually promising ingredients.

Why the aggregate and seal must be selected together

Silicon carbide is used here as a functional part of a defined composite. A 0.5–1.0 mm grain band is a configuration reference, not a universal recipe or a slip rating. Grain distribution, embedment and the finishing coat determine the surface that footwear and wheels actually touch. Ordinary decorative sand cannot be assumed to replace the specified aggregate without changing electrical performance.

Likewise, a thicker seal does not automatically improve the floor. Too little can leave open recesses that trap dirt; too much can bury the texture and alter electrical contact. The approved construction may achieve its result through the interaction of several layers, so every individual layer need not carry the same standalone resistance classification. Test the completed, sealed assembly rather than accepting a base-layer reading as the final result.

Match the chemical duty to the working conditions

Chemical resistance depends on the substance, concentration, temperature and contact duration. Intermittent splashes with prompt cleanup differ from repeated pooling or immersion. Rolling loads, abrasion and heat can act at the same time as chemical exposure, and separate favourable test results should not be combined into an unsupported service limit.

Drain edges, coves, penetrations and moving joints need compatible details. A resistant floor surface alone does not establish a watertight containment installation. If flammable materials are involved, the static-ignition assessment must address the process under appropriate guidance such as IEC 60079-32-1; electronics ESD acceptance alone does not settle that requirement.

Control the broadcast and the final profile

Prepare and repair the substrate before installing the specified primers and grounding connections. Apply the broadcast at the correct stage of the wet resin, then remove loose material after curing before the next operation. Uneven distribution can leave smooth patches, excessive peaks or local differences in contact. A site sample helps agree traction, trolley movement and cleanability with the proposed final seal.

Record the finished build, material batches and ground locations. Separate electrical bays and movement joints require planned connections rather than an assumption that charge will pass across every joint.

Acceptance and maintenance

Specify resistance-to-ground and other required measurements with their methods, environmental conditions and limits. Include footwear-system evaluation where personnel grounding is required. In service, remove residues that mask the texture or electrical contact, and repair worn patches using the approved aggregate and seal schedule. Retest after repair or resurfacing; a clear protective coat chosen only for appearance can change the functional surface.

Planning your Conductive Epoxy Flooring Chemical-Resistant Broadcast specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us