Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Wall & Ceiling Systems / Concealed Cleanroom Ceiling Grid 73 mm Swing-Down
zhengfeng-CONCEALED-CLEANROOM-CEILING-GRID-73-SWING-DOWN

Concealed Cleanroom Ceiling Grid 73 mm Swing-Down

A retained cassette folds below the concealed grid for planned service access.
  • Swing-down access helps keep the opened leaf near its ceiling bay.
  • Bevelled edges provide a defined sealing interface.
  • The 73 mm system build-up suits shallow concealed installations.
Request a Quote Browse Products

Retain the cassette while it swings down

The concealed ceiling uses 600 × 600 mm galvanized steel cassettes with a clip-in, swing-down arrangement. Reference geometry includes an approximately 73 mm system build and a roughly 7 mm joint around bevelled edges. The cassette can remain at its bay during routine service access instead of being carried away as a loose tile.

Plan the swing direction and the space occupied by the opened cassette. Nearby equipment, lights and operators can obstruct the movement even where the ceiling void is shallow. The retaining mechanism must remain engaged throughout the intended opening sequence.

A bevel defines the joint, not the complete seal

The formed edge gives a repeatable perimeter for the selected joint treatment. It does not prove air-tightness by itself. Specify whether the room requires an applied seal, another sealing element or a defined dry connection.

If sealant closes the joint, the maintenance method must include cutting, cleaning and renewing that seal before the room returns to its required condition. A swing-down mechanism should not be described as sealant-free unless the selected joint construction supports that statement.

Allow for suspension and installed equipment

The 73 mm system build is distinct from the total suspended depth and tool clearance. Check the carrier, hanger and anchor arrangement together with services above. Determine support spacing and any additional equipment suspension from the selected assembly and loads.

Use compatible edge components at perimeter bays and special cut-outs. The cassette is non-walkable. A retained open panel is supported for its own intended movement, not as a shelf for tools or as a handhold.

Purchase scope and acceptance

Quote panel finish, grid and suspension, swing hardware, perimeter trims, service apertures, joint sealing and access tools. Identify the bays intended for frequent maintenance and any opening large enough for component replacement.

Demonstrate opening, retention, closing and full clip engagement at handover. Inspect edge alignment, coating and the completed seal path, and perform the specified enclosure test where required. During service, replace worn or distorted hardware before relying on retention. The swing-down function provides access; it does not establish a fire, cleanroom or leakage classification.

Planning your Concealed Cleanroom Ceiling Grid 73 mm Swing-Down specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us