Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Wall & Ceiling Systems / Cleanroom Wall Base Channel 100-130 mm Adjustable
zhengfeng-CLEANROOM-WALL-BASE-CHANNEL-100-130-ADJUSTABLE

Cleanroom Wall Base Channel 100-130 mm Adjustable

An adjustable panel interface above a fixed base, coordinated with the complete flooring build-up.
  • The upper member adjusts independently of the anchored channel.
  • The recess is coordinated with a specified vinyl flooring build-up.
  • A 2.5 mm metal wall thickness forms the selected extrusion section.
Request a Quote Browse Products

Set the panel interface above an anchored base

This two-part 6063 aluminum wall-base arrangement separates the floor-fixed channel from an adjustable upper panel interface. The nominal 100–130 mm configuration is intended to coordinate wall elevation with a recessed finish detail for 2 mm vinyl flooring. The assembly drawing must define where that height is measured and how the upper member is supported at the selected setting.

Adjustment needs a supported load path

The proposed extrusion wall thickness is 2.5 mm. This is material thickness, not the structural depth or an allowable wall load. As the upper member is raised, engagement and support conditions change. Any jacking blocks, fixings and minimum overlap must therefore be specified for the actual setting.

Survey floor levels before selecting the adjustment range. The available range is not unrestricted correction for a sloping substrate. Coordinate the wall head and adjacent openings so local base adjustment does not force panels into misalignment elsewhere.

Build the flush flooring transition

The 2 mm vinyl reference describes the covering thickness. Adhesive, substrate preparation and local floor level also affect the completed flushness. Trial the wall-panel face and flooring termination together, including the chosen cove former and top seal where used.

Anchor the lower channel to the designed substrate, set and support the upper member, then lock the assembly before closing the wall. Fixing spacing must follow the selected profile and loads rather than a universal interval. Remove swarf and inspect hidden supports and seals while access remains available.

Quotation, acceptance and maintenance

Provide the level survey, wall reactions, panel section, finish build-up and required base height. Identify lengths, base and upper profiles, jacking supports, anchors, fasteners and flooring accessories separately in the quotation. Acceptance should record final settings, overlap, support positions, locking and the finished floor-to-panel transition. If later floor replacement changes thickness, reassess the interface instead of assuming the original recess will remain flush.

Planning your Cleanroom Wall Base Channel 100-130 mm Adjustable specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us