Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Flooring / Cleanroom Rubber Sheet Flooring 2 mm Homogeneous
zhengfeng-CLEANROOM-RUBBER-SHEET-FLOORING-HR20

Cleanroom Rubber Sheet Flooring 2 mm Homogeneous

A solid vulcanized rubber body supplies resilience without a separate foam cushion.
  • Solid vulcanized rubber body
  • 2 mm sheet without foam backing
  • 1.22 m reference roll width
Request a Quote Browse Products

Resilience from a solid rubber body

This 2 mm homogeneous vulcanized rubber sheet provides a compact resilient finish for laboratory circulation and controlled support corridors. It has no foam backing: deformation and recovery come from the rubber compound itself. That keeps the build-up shallow while retaining a firm, fully supported surface beneath suitable carts.

The reference roll width is 1,220 mm. Plan seams through corridor turns and doorways before calculating material quantities. Solid rubber through the thickness differs from a printed vinyl wear film, but it does not mean all rubber compounds have the same hardness, chemical resistance or indentation behavior.

Choose the compound for the actual use

Hardness is one material property, not a load rating. Small hard casters and long-term parked equipment can impose high contact pressure even on a firm rubber floor. Selection should use the actual wheel loads and evidence for the selected sheet and adhesive. A compact finish cannot compensate for weak leveling material beneath it.

Laboratory chemical exposure also needs a specific review. Concentration, contact time and cleaning method matter; oil, solvent or reagent resistance cannot be assumed from the word rubber. Use spill controls around dispensing stations and select another finish where the proposed compound is incompatible.

Bonding and joint treatment

Prepare a flat, cohesive substrate and assess moisture for the selected adhesive. Full-area contact supports the sheet and prevents edges or seams moving under traffic. Account for adhesive and any leveling layer when forming a flush doorway transition.

Specify the joint-sealing method for this rubber and the hygiene requirement. PVC weld rod and vinyl welding settings are not interchangeable with a rubber seam system. Detail coves, thresholds and penetrations with compatible materials, while maintaining structural movement joints.

Care, quotation and acceptance

Remove grit and recover cleaning liquid rather than leaving a sticky film. Use rubber-compatible pads and chemicals, and inspect seam edges for lifting. Deep cuts or chemical swelling need a repair plan rather than aggressive polishing.

Quote the sheet, cutting waste, preparation, adhesive, seam treatment and perimeter details separately. Provide traffic, chemicals and cleaning conditions with the room plan. Acceptance should verify the supplied compound and dimensions, bond, seams and level transitions, with supporting evidence for any requested load, chemical or cleanroom performance.

Planning your Cleanroom Rubber Sheet Flooring 2 mm Homogeneous specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us