Cleanroom Return Air Grille 600 x 350 mm
- Landscape proportions distribute the opening across a broader wall bay.
- The removable filter is sized specifically for this housing.
A low rectangular return below a work surface
The 600 x 350 mm return grille gains frontage while retaining the catalog's 260 mm recessed depth. A 582 x 332 x 18 mm reference panel filter sits behind the removable room-facing part. The shape can fit a lower wall service band, provided the worktop, pedestal and stored equipment leave the air approach and filter withdrawal path open.
Placing a return under a bench does not guarantee that it receives air from the intended room zone. A cabinet front or stored trolley can obstruct the inlet, while a nearby supply can short-circuit directly to it. Coordinate the return with the complete room airflow layout.
What the wider filter changes
At the same airflow, a larger available filter face can reduce average face velocity, but grille open area, media construction and the return connection still determine resistance. The wider housing is not automatically a higher-flow replacement at the existing duct size. Compare the selected filter's clean and loaded pressure data with the branch duty.
| Catalog item | Reference |
|---|---|
| Housing face | 600 x 350 mm. |
| Recess | 260 mm body depth. |
| Element | 582 x 332 x 18 mm panel, with exact frame and seal defined by the selection. |
| Build options | Aluminum or stainless steel; identify exposed and concealed components. |
| Installation | Flush low-wall return. |
Specify filtration by evidence
The original F5/F8 options are legacy class descriptions. They are not interchangeable with an ISO ePM rating, and a classification for similar media does not establish performance of this assembled shallow element. Select the actual tested replacement with a stated airflow and pressure curve. A filtered return is not automatically a HEPA exhaust terminal or a containment barrier.
Changing to a more restrictive element can alter return volume and room pressure balance. Plan the change with the ventilation system limits instead of treating a grade upgrade as a simple material substitution. Check the fit and bypass seal as well as the media classification.
Installation, maintenance and quotation
Provide a supported opening, sealed wall interface and accessible connection behind the 260 mm box. Flush mounting still requires a room-side clearance envelope for the grille and filter. Protect the seat from cleaning liquid and replace damaged or distorted elements; use only a cleaning method authorized for the selected filter.
Include grille, box, filter, wall trim, material grade, connection, pressure monitoring and spare elements in the purchase schedule. Acceptance should verify unobstructed approach under the worktop, complete filter removal, secure seating, actual return flow and any specified pressure-cascade response. Retain filter identification and the initial resistance reading so later maintenance uses the correct replacement.
Planning your Cleanroom Return Air Grille 600 x 350 mm specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.