Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Air Ducts & Air Distribution / Cleanroom Return Air Grille 400 x 350 mm
zhengfeng-CLEANROOM-RETURN-AIR-GRILLE-400X350

Cleanroom Return Air Grille 400 x 350 mm

A compact wall return holds a replaceable panel filter behind the room-side grille, with the wall cavity and filter specification selected together.
  • Room-side access simplifies scheduled filter changes.
  • A compact face leaves adjacent wall space available for services.
Request a Quote Browse Products

A filtered return within a narrow wall bay

The 400 x 350 mm return assembly places a replaceable panel filter behind a room-side grille. It collects room air into a recessed return path and intercepts particles according to the selected filter. A short frontage can suit a restricted wall bay, but the listed 260 mm body depth requires more than the thickness of many partition panels.

Match the wall cavity, connection and filter

ItemCatalog reference
Overall face400 x 350 mm.
Body depth260 mm, with duct and fixing clearance additional as shown on the drawing.
Filter size382 x 332 x 18 mm reference; match frame tolerances and retention.
MaterialsAluminum or stainless steel configuration.
MountingFlush, low-level wall return with room-side filter access.

The housing dimensions are not a wall cut-out specification. Locate structural framing, rear services and the return connection before forming the opening. Provide a sealed interface to the wall and duct, with the filter seated so air does not bypass its edges. Select metal grade and finish for the actual cleaning chemicals rather than relying on the word stainless.

Interpreting the original F5/F8 choices

The catalog uses legacy F5/F8 filter labels. Procurement needs the offered element's actual test standard, classification, pressure-drop curve and rated airflow; those labels do not establish an ISO 16890 class or HEPA performance. An 18 mm panel depth alone cannot establish fine-particle efficiency. Where an ISO 16890 rating is required, use the tested ePM classification rather than a direct conversion from an older class.

Higher resistance can reduce the return flow unless the system has sufficient pressure and balancing capability. Select the grille and filter together and account for filter loading. A low return location does not guarantee capture at a work process or safe handling of hazardous exhaust; those duties require their own engineered extraction and containment.

Service and acceptance

Keep carts and equipment clear of the grille and leave room for the filter to be withdrawn. Remove loaded elements without releasing deposits into the room; disposable media should not be washed unless its instructions permit it. Inspect the seat and retainers before fitting the replacement.

A quote should identify the actual filter, grille, box, wall frame, connection, material finish and any pressure taps. Handover includes dimensional fit, filter seating, accessible service, measured return volume and the room-pressure checks required by the system design. Record initial filter resistance for later maintenance comparison; replacement frequency depends on operating condition, not a universal calendar promise.

Planning your Cleanroom Return Air Grille 400 x 350 mm specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us