Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Doors, Windows & Interlocks / Cleanroom Personnel Access Door 950 mm Stainless Masonry-Wall
zhengfeng-CLEANROOM-PERSONNEL-ACCESS-DOOR-MASONRY-950

Cleanroom Personnel Access Door 950 mm Stainless Masonry-Wall

A stainless-faced 40 mm leaf serves a wider personnel entrance in a suitable solid-wall surround frame.
  • Stainless facing provides a defined metal surface for cleaning compatibility.
  • The larger single-leaf wall hole adds width without a secondary leaf.
  • Deep frame returns suit substantial existing partitions.
Request a Quote Browse Products

A stainless face for a wider solid-wall entrance

This single hinged personnel door has a 950 × 2100 mm wall opening, a 40 mm stainless-faced leaf and a surround-frame arrangement for solid walls at least 105 mm thick. It suits a retrofit where the room needs a metal contact surface and more passage allowance than the smaller masonry-door formats. A handle lock is standard to the arrangement; an upper closer and stainless handle set can be specified.

Specify the stainless parts precisely

The face material does not identify the grade of every component. A quotation should name the leaf-face grade and finish separately from the frame, hinges, handles and fasteners. Cleaning exposure is part of that choice: chloride-containing residues and liquid trapped around joints can promote localized corrosion, even when the broad face still appears clean. Smooth, accessible joints and compatible cleaning practices are useful alongside the grade selection.

The 950 mm wall opening is larger than the finished clear width. Door stops, leaf position and handles determine usable passage. The complete leaf mass and width also affect hinge and closer selection; a stainless face by itself does not establish the weight or a hardware capacity.

Install for alignment and service access

Survey the reveal and final floor level, then match the frame depth to the finished wall. Anchors must engage sound masonry, with support at the fixing points so tightening does not pull the frame out of line. Where dissimilar metals meet in a damp location, use a compatible fixing and isolation detail. Keep joints accessible for cleaning and future hardware adjustment.

Set any closer to return and latch under the room's operating pressure without excessive opening effort. Check hinge friction and seal contact first if the door becomes difficult to move. A conventional handle lock does not by itself provide emergency-exit or interlocking functionality.

Scope and acceptance

Include material grades, surface finish, frame depth, handing, hardware, anchors and wall-joint finishing in the supply scope. Acceptance should record actual clear passage, finish condition, anchoring and repeated opening, closing and latching. Remove cleaning residues according to the approved procedure and investigate recurring staining at joints rather than repeatedly polishing the visible face.

Planning your Cleanroom Personnel Access Door 950 mm Stainless Masonry-Wall specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us