Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Doors, Windows & Interlocks / Cleanroom Personnel Access Door 900 mm HPL Masonry-Wall
zhengfeng-CLEANROOM-PERSONNEL-ACCESS-DOOR-MASONRY-900

Cleanroom Personnel Access Door 900 mm HPL Masonry-Wall

An HPL-faced hinged leaf provides a nonmetallic finish for personnel access through an existing solid wall.
  • HPL facing gives the leaf a smooth nonmetallic surface.
  • The intermediate door-hole width balances wall-space use and staff passage.
  • A solid-wall frame avoids thin-panel-only installation details.
Request a Quote Browse Products

HPL-faced access through a masonry partition

The 900 mm masonry-wall personnel door uses a 40 mm HPL-faced leaf and a frame suited to solid walls at least 105 mm thick. It provides a nonmetallic surface finish for an existing room entrance, with a conventional handle lock and optional overhead closer. The scheduled wall opening is 900 × 2100 mm.

Choose the surface and its edge details together

High-pressure laminate provides the exposed face; the door's core, edge closure and bonded joints determine how the complete leaf behaves in service. A wipeable face does not make every edge or hardware penetration suitable for soaking or pressure washing. Match the proposed cleaner, concentration and contact time to the assembled leaf and seals. Use nonabrasive cleaning and remove residues without flooding the joints.

The 900 mm opening offers more room than a narrower retrofit, but it is still a construction dimension. The installed frame and open leaf determine the clear passage. Measure both the walking route and the space required to turn a trolley through the entrance.

Coordinate the deep frame and door hardware

A surround frame must accommodate the finished wall thickness, including any uneven plaster or lining, while its anchors transfer loads into sound supporting material. Maintain a plumb hinge line rather than using the frame to straighten the wall. Close the frame-to-wall joint with a compatible, cleanable detail and keep hardware recesses free of building debris.

Closer and handle fixings need the appropriate internal backing; the laminate face alone is not their support. Select handing and closer mounting before manufacture so the arm can move without contacting a deep reveal. Adjust closing and latching with the ventilation running, checking that the door returns fully without slamming.

Buying and maintaining the complete entrance

A comparable quote identifies HPL finish, core and edges, frame depth, measured wall opening, lock, closer if selected, anchors and perimeter finishing. At handover check clear passage, edge condition, swing clearance and lock operation. Later swelling, loose trim or difficult latching calls for an inspection of moisture exposure and alignment before simply tightening the hardware.

Planning your Cleanroom Personnel Access Door 900 mm HPL Masonry-Wall specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us