Cleanroom HEPA Terminal Housing 610 x 610 mm
- Standard square filter format simplifies terminal layout.
- Choice of diffuser faces separates filtration from discharge pattern.
A square filter housing with a selectable discharge face
The 610 x 610 mm terminal housing combines a permanent welded casing with a room-side replaceable filter and hinged diffusion plate. It is intended for terminal filtration in controlled production, pharmaceutical and healthcare projects where maintenance access is available below the ceiling. The filter removes particles; the face distributes the filtered supply. These two functions need separate selection.
What the square dimensions describe
| Item | Listed arrangement and design check |
|---|---|
| Filter size | 610 x 610 mm face; depth, frame and seal remain part of the element specification. |
| Outside frame | 697 x 697 mm reference dimension; coordinate the actual cut-out and border. |
| Construction/access | Welded body, room-side service and hinged diffusion plate. |
| Sealing | DIN-type flat gasket, PU gasket or gel-seal option with matching casing interface. |
| Filter retention | Tool-free clamps in the catalog arrangement. |
| Discharge choices | Perforated, swirl, four-way or adjustable-vane face. |
| Connection options | Top entry or side-entry arrangement with a selected balancing damper. |
A 610 mm filter does not imply that the outside housing fits a 600 mm ceiling bay. Establish the ceiling flange, structural support and sealing detail from the approved assembly drawing. Check filter removal clearance as well as the space needed above the ceiling for the duct connection.
Choose the face for the room airflow objective
A swirl or directional face is useful where the design relies on mixing and temperature equalization. A perforated face changes the discharge geometry but does not, by itself, create a qualified unidirectional airflow zone. Sensitive open-process protection requires the specified velocity distribution and airflow study for the complete installation.
Changing the face can change resistance, throw and sound at the same flow. A compatible mounting pattern is therefore only the first compatibility check. Compare the selected filter's clean and service pressure drops, diffuser data, balancing range and room layout. Keep adjustable vanes and settings accessible and recorded so cleaning does not silently alter the commissioned pattern.
Room-side maintenance without losing the sealing reference
Open and secure the hinged plate before handling the filter. Inspect the sealing surface for damage and trapped debris; use the replacement element and clamp procedure specified for the installed seal. Gel and compression-gasket elements cannot be exchanged merely because their face dimensions agree. A balancing damper is not automatically an isolation device, so the maintenance isolation method must be defined separately.
The purchasing schedule should identify the filter grade and depth, seal, face style, casing finish, inlet position, suspension and test connections. Price the filter, controls and site testing explicitly. At handover, verify airflow, face operation, accessible test points and installed-filter leakage against the agreed procedure. A filter certificate and a housing inspection address different parts of that evidence.
Planning your Cleanroom HEPA Terminal Housing 610 x 610 mm specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.