Cleanroom HEPA Supply Air Terminal 915 x 610 mm Ultra-Thin 900 m³/h
- 3:2 footprint covers a wider ceiling strip.
- Shallow housing suits rectangular low-clearance modules.
A rectangular terminal that follows the ceiling bay
This 915 x 610 mm terminal extends the filtering footprint along one axis while retaining a nominal 150 mm body depth. The aluminum perimeter supports a glass-fibre pack beneath a steel duct-connection plate. It provides a fanless final supply point for an upstream air system, useful where the ceiling bay is rectangular and the available void is shallow.
A wider footprint can help distribute a specified volume over more face area, but uniformity depends on the plenum, inlet and filter arrangement. The 3:2 shape does not establish a uniform downward velocity field or protective unidirectional airflow.
Reference dimensions and filtration requirement
| Item | Selection basis |
|---|---|
| Body footprint | 915 x 610 mm nominal; coordinate the ceiling opening and sealing flange separately. |
| Body depth | 150 mm; allow additional room for ductwork, support and replacement. |
| Volume | 900 m³/h listed duty, subject to the selected assembly's operating data. |
| Initial pressure drop | Up to 120 Pa listed reference; require the stated test airflow and components included. |
| Construction | Aluminum-profile perimeter, glass-fibre medium and steel top connection plate. |
| Filter qualification | Specify the required standard and class with the element's test report; the former ≥99.9% at 0.3 µm entry does not substantiate HEPA status. |
Why inlet location matters in a shallow rectangle
The entry connection has limited depth in which to spread air before it reaches the pack. A connection moved to avoid a beam may change pressure distribution across the face. Have the inlet arrangement and operating flow assessed together, and include velocity mapping if the process depends on distribution. Do not assume an alternative neck position is only a fabrication detail.
Check available supply pressure at the desired flow with both clean and service filter resistance. Increasing fan speed to recover a shortfall may affect adjacent terminals, sound and room balance. The terminal provides filtration and delivery, while total room pressure and ventilation depend on the wider system.
Seal, access and condition monitoring
Set out suspension points and protect the rectangular perimeter from twisting during duct connection. A deformed seat can create bypass leakage even when the filter medium is sound. Identify whether the pack or complete unit is replaceable and provide a handling route that avoids contact with the media.
Keep test and pressure connections accessible after ceiling closure. Track pressure at known flow, inspect external sealing interfaces and follow the selected replacement procedure when damage or service limits require it. Do not wash the glass-fibre pack as a routine cleaning step.
Quotation and acceptance for the actual assembly
Include the filter class and report, inlet position and dimensions, frame/seal, outlet face, pressure and aerosol ports, suspension and site testing in the purchase scope. Confirm the relevant filtration classification independently of the product title. At handover, record flow, pressure, sealing condition and the agreed installed leakage test; specify any required face-distribution measurements separately. A factory efficiency report cannot establish a leak-free installation or a room cleanliness class.
Planning your Cleanroom HEPA Supply Air Terminal 915 x 610 mm Ultra-Thin 900 m³/h specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.