Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Doors, Windows & Interlocks / Cleanroom Floor-Spring Door 800 mm HPL
zhengfeng-CLEANROOM-FLOOR-SPRING-DOOR-HPL-800

Cleanroom Floor-Spring Door 800 mm HPL

A compact HPL pivot leaf uses floor-level closing hardware with a coordinated frame, gasket and stainless handle.
  • Floor-level closing hardware clears the upper frame area.
  • The narrow HPL leaf suits compact circulation openings.
  • Perimeter rubber gaskets cushion the closing interface.
Request a Quote Browse Products

Floor-controlled closure for a compact HPL entrance

This single HPL-faced pivot door places the closing mechanism beneath the leaf, leaving the upper frame free of an exposed closer arm. It is arranged for an 800 × 2100 mm wall hole, with rubber perimeter gasketing and a stainless handle. Frame options suit 50, 75 or 100 mm wall panels.

The pivot position determines usable space

A floor spring acts through the bottom pivot while an aligned top pivot locates the leaf. This arrangement needs space in the floor and within the leaf connections. The 800 mm wall hole is not the walking clearance: the frame, pivot offset and open leaf reduce it. On this narrow format, check the finished passage and handle approach before choosing the floor-spring arrangement.

A floor spring does not inherently mean double-action opening. The selected pivots, stops and gasket geometry must agree on the permitted swing direction. The rubber seal can cushion contact and reduce gaps, but does not establish an air-leakage rating for the complete door.

Resolve the floor detail before finishing

Locate the closer pocket against the final floor level, slab construction and any concealed services. The closer and upper pivot need reliable support and a common axis; misalignment can make the leaf bind and wear its fittings. Specify the box, spindle and bottom connection as a compatible set rather than choosing a closer by its visible cover size.

The access cover must remain removable and level with the surrounding finish. Protect the pocket against cleaning moisture using the selected closer system's installation detail. If the floor cannot accommodate a pocket or maintenance access, an overhead or another suitable closing arrangement may be more practical.

Scope and service checks

Include HPL finish and edges, frame for the selected wall, pivots, floor spring, box, cover, seals, handle and floor finishing in the quote. At handover measure clear passage and check opening effort, controlled return and gasket contact under working ventilation. Keep the cover clean and accessible; dragging, oil leakage or a shifting pivot requires service. Do not use stronger closing force to conceal floor or pivot misalignment.

Planning your Cleanroom Floor-Spring Door 800 mm HPL specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us