Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Air Ducts & Air Distribution / Cleanroom Exhaust Air Grille 600 x 600 mm Stainless Steel
zhengfeng-CLEANROOM-EXHAUST-AIR-GRILLE-600X600

Cleanroom Exhaust Air Grille 600 x 600 mm Stainless Steel

plan effective area, wall support, mesh maintenance, broad-panel handling and measured extraction.
  • Broad face distributes extraction across a larger wall area.
  • Accessible mesh provides a local lint collection surface.
  • Removable front supports cleaning without withdrawing the complete assembly.
Request a Quote Browse Products

A broad exhaust face for a larger wall opening

The 600 × 600 mm stainless exhaust grille offers a larger collection face where the wall and connected extract system can accommodate it. The nominal square area is 0.36 m², but the front structure and metal mesh reduce the area available for airflow. Select the assembly from its actual resistance and required extract duty, rather than assuming a capacity from the face dimensions.

Coordinate the opening and supporting frame

A 687 × 687 mm outside face and 13.5 kg complete mass are reference layout values. The exact opening, frame engagement and fixing locations belong on the approved drawing. The wall should carry the selected assembly through its supporting detail; thin panel facings alone should not be assumed to provide the required fixing strength.

The room-side front, grille frame and mesh are specified in 316L stainless steel, while the separate fixing frame is galvanized steel. Specify any finish or material changes for the actual washdown and chemical exposure. A material grade does not establish compatibility with every disinfectant or cleaning temperature.

A large grille still needs an effective air path

Design issueReason it matters
Plenum and branch positionA restricted or offset connection can cause uneven use of the face.
Mesh conditionFibre loading adds resistance and affects the operating flow.
Nearby furniture or equipmentObstructions can block collection and prevent maintenance.
Room supply patternAir must reach the extract without leaving poorly swept locations.

The reference 0.2 mm mesh is a coarse fibre separator. Neither this aperture nor the larger face proves HEPA efficiency, microbial removal or a cleanroom class. Hazardous process exhaust requires its own containment and treatment assessment.

Allow for broad-panel handling

Provide space to support and remove the front without damaging its edges or the surrounding wall. Keep face fixings accessible, and select a mesh-cleaning method that does not distort the screen. Replacement parts should match the installed frame and separator specification.

The purchase schedule should define design airflow, pressure loss, sound requirement, plenum and duct interfaces, mounting and separate balancing hardware. Commission the grille with the final room obstructions and mesh in place. After cleaning or replacement, check secure reassembly and restore the documented air balance; a larger opening alone does not guarantee the intended room pressure.

Planning your Cleanroom Exhaust Air Grille 600 x 600 mm Stainless Steel specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us