Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Air Ducts & Air Distribution / Cleanroom Exhaust Air Grille 400 x 200 mm Stainless Steel
zhengfeng-CLEANROOM-EXHAUST-AIR-GRILLE-400X200

Cleanroom Exhaust Air Grille 400 x 200 mm Stainless Steel

distinguish nominal size, mounting opening, coarse mesh function, low-level cleaning and extract duty.
  • Shallow landscape face suits low-level wall extraction.
  • Room-side screw access releases the front for cleaning.
  • Metal mesh intercepts clothing fibres before they enter the duct.
Request a Quote Browse Products

A low rectangular exhaust opening with a removable face

The 400 × 200 mm cleanroom exhaust grille suits a shallow wall position where a tall square opening would conflict with services or wall details. Air passes through the front and metal mesh into the connected extract path. The mesh intercepts clothing fibres and similar coarse debris before they accumulate farther into the duct.

A nominal 0.2 mm mesh opening is 200 micrometres. It is a physical aperture reference, not a fine-particle efficiency or a HEPA classification. This grille does not establish room cleanliness, remove gases or replace any filtration required by the exhaust process.

Keep the three dimensions separate

ReferenceMeaning for the layout
400 × 200 mmNominal grille size, not a guaranteed finished wall opening.
487 × 287 mmReference outer face envelope; check the supplied drawing before cutting panels.
6.5 kgReference complete assembly mass, subject to the selected construction.
316L stainless room-side partsFront, grille frame and mesh material specification.
Galvanized fixing frameA separate mounting component whose exposure and sealing need consideration.

The fixing interface, opening tolerance and wall thickness must come from the approved assembly drawing. An outer face can cover an opening without providing a suitable fixing surface. Support the frame from an appropriate wall detail and seal the perimeter without obstructing front removal.

Low-level installation needs cleaning access

A low grille can collect fibres, cleaning debris and splash. Leave room to release the face fixings and remove the mesh without moving permanent equipment. Choose cleaning agents, contact times and rinsing methods compatible with every exposed material; a stainless front does not make the galvanized frame equally resistant.

Accumulated material increases resistance and can reduce extraction. Establish an inspection interval from actual loading, then refit the clean mesh and front securely. Removing the mesh permanently changes the selected assembly and its protection of the duct.

Define the extract duty

Size the branch using required airflow, pressure loss and acceptable sound with the mesh fitted. A low mounting position alone does not guarantee capture of contaminants throughout the room. The offer should include the grille, fixing frame, mesh, perimeter details and any separate balancing device. Handover should verify extraction and accessibility in the installed room arrangement.

Planning your Cleanroom Exhaust Air Grille 400 x 200 mm Stainless Steel specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us