Cleanroom Equipment Access Door 1500 mm Reinforced Double
- Paired leaves divide the moving panel width evenly.
- A strengthened surround supports an equipment-oriented opening.
- Coated faces provide a straightforward opaque interior finish.
An equal pair for equipment movements
The 1500 mm reinforced double door uses equal coated galvanized-steel leaves, each 40 mm thick, within a strengthened frame. Its wall hole is 1500 × 2100 mm. Frame selections accommodate 50 or 90 mm partitions, making it a candidate for equipment access in a coordinated cleanroom wall system.
Decide how often both leaves must open
An equal pair shares the opening between two leaves. With only one leaf in use, the clear passage may be too narrow for everyday carts even though the combined opening is suitable for equipment. If both leaves need releasing on most journeys, consider the handling procedure and appropriate hardware, or a different leaf arrangement.
Opening both leaves does not expose the entire wall-hole width. The installed frame and the leaves at their working angle define clear width and height. Include handles, hinges and any retaining hardware when checking the equipment path. Allow space for the leaves to swing clear of adjacent benches and corridor traffic.
Support and coordinate the pair
The frame's reinforcement must connect to suitable backing in the partition; relying on thin wall skins can permit movement at the hinges. Establish the finished floor level and support the frame without twisting its head or jambs. Use the selected 50 or 90 mm interface detail rather than filling an incompatible frame throat on site.
Specify which leaf carries the normal handle and how the other is retained. With rebated meeting edges, closure order can matter: the second leaf must not prevent the first from seating. Optional upper closers need a compatible arrangement and sufficient mounting space. Assess door return under working room pressure, since an overly strong closer increases manual opening effort.
Supply, use and inspection
A complete offer covers coated leaf finish, reinforced frame, supporting connections, locks and retainers, selected closers and perimeter joints. Acceptance includes the clear opening with both leaves parked, normal single-leaf use and repeated closure of the pair. Repair damaged coating at cart-contact points with a compatible system. Loose anchors, a widening meeting gap or recurring latch misalignment warrant support inspection; a reinforced frame is not a substitute for traffic impact protection.
Planning your Cleanroom Equipment Access Door 1500 mm Reinforced Double specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.