Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Doors, Windows & Interlocks / Cleanroom Equipment Access Door 1350 mm Reinforced Unequal-Leaf
zhengfeng-CLEANROOM-EQUIPMENT-ACCESS-DOOR-REINFORCED-1350

Cleanroom Equipment Access Door 1350 mm Reinforced Unequal-Leaf

An unequal reinforced pair provides routine active-leaf access and a wider opening for occasional equipment transfers.
  • A secondary leaf supports occasional wider transfers.
  • Strengthened frame construction distinguishes the set from a basic personnel frame.
  • Laminate faces suit interior equipment-access routes.
Request a Quote Browse Products

Everyday access with an occasional wider opening

This reinforced unequal-leaf equipment door combines HPL-faced 40 mm leaves with a strengthened frame. The nominal wall hole is 1350 × 2100 mm, with frame configurations for 50 or 90 mm walls. The active leaf serves routine passage while the secondary leaf can be released for larger equipment movements.

Size the active leaf around normal traffic

An unequal pair is useful when a full-width opening is needed only occasionally. Its leaf split must leave enough clear space for everyday users and their usual loads; the 1350 mm overall wall hole does not state that split. Both leaves open for the larger transfer, but frame profiles, meeting details and leaf positions still reduce the usable opening.

Before selecting the split, plot the equipment envelope, including handles, wheels and protective packaging, through the approach and turn into the room. A trolley may fit the doorway straight on and still be unable to turn in the corridor. The secondary-leaf retaining hardware must be reachable without blocking this route.

Reinforcement needs a complete load path

The strengthened frame supports the hinges and hardware only when its fixings and wall supports are suitable. A 50 or 90 mm partition skin is not automatically a structural anchor location. Coordinate backing and attachment details with the wall supplier. Reinforcement does not establish a collision rating; separate guards may be appropriate where carts can strike the opening.

Set the frame square and align the secondary leaf with its receivers before adjusting the active latch. Where overlapping meeting edges or selected closers require an order of closure, provide the corresponding coordination. Keep floor receivers, if used, accessible for cleaning and clear of debris.

Define the transfer procedure and supply scope

The quote should state leaf split, clear passage in both modes, HPL and edge construction, wall thickness, frame backing, lock, secondary retention and any upper closers. Handover includes a representative equipment transfer and reliable restoration to the normal closed condition. Inspect HPL edges, hinge fixings and meeting clearances after impacts; repeated dragging usually requires alignment or support correction rather than more closer force.

Planning your Cleanroom Equipment Access Door 1350 mm Reinforced Unequal-Leaf specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us