Cleanroom Emergency Exit Door Single-Leaf Steel Panic-Exit
- A horizontal push bar provides an obvious escape-side operating surface.
- Single-leaf geometry avoids a central meeting joint.
- Overhead closure keeps the principal closer accessible for maintenance.
A single-leaf exit integrated with the cleanroom wall
This personnel exit uses a sandwich leaf with 1.00 mm galvanized-steel faces and an aluminum hollow-chamber frame. A horizontal panic bar provides the escape-side release, while an overhead closer returns the leaf after passage. Flush wall integration reduces projecting perimeter edges. The single leaf avoids the center joint and closing-order requirements of a pair.
Select the exit hardware as a compatible system
The push bar must operate the selected latch or panic lock on the actual leaf size, mass and handing. A bar's appearance alone does not establish the assembly's suitability for the required escape route. Specify the applicable exit-hardware requirements for the project and obtain evidence for the complete chosen combination. Entry-side access control must preserve the required escape-side operation.
Room pressure and seals affect both opening effort and reliable closing. Increasing closer force may solve incomplete latching while making the door harder to open. Commission the closer under the operating pressure conditions, balancing closing speed, latch engagement and required opening force. An overhead closer needs reinforced mounting points in the leaf and frame, not screws relying only on thin face sheet.
Seals, observation and monitoring
An optional automatic drop seal contacts the floor at closure and retracts during opening, avoiding a fixed raised threshold. Excessive drop can drag or prevent latching; the finished floor and adjustment must be coordinated. Optional flush glazing adds visibility but should be included in any separate fire or acoustic assessment.
A reed contact reports door position. It does not demonstrate that the panic latch is fully engaged. If the access system needs both states, specify the appropriate signals and how faults are handled. Keep the bar and escape route clear of additional bolts, chains or obstructions.
Quotation and acceptance
Provide finished clear width and height, wall build-up, handing, pressure conditions and the hardware schedule. Include reinforcement, closer, bar/lock, optional seal or glazing, contacts and installation. Handover should demonstrate release from the escape side, reclosure and latching, usable passage and the access-control failure response. Inspect fasteners, seals, closer adjustment and bar action during service. The steel facing does not establish a fire-resistance rating for the doorset.
Planning your Cleanroom Emergency Exit Door Single-Leaf Steel Panic-Exit specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.