Cleanroom Electric Drop Bolt Lock Key-Override
- Key override adds a separate physical operating route.
- Surface-housing accessories support alternative installation.
- The matched strike maintains positive pin engagement.
Mechanical recovery alongside electrical locking
The key-override electric drop bolt combines normal electrically controlled deadbolting with a Euro-profile cylinder interface for authorised manual release. It suits controlled doors where maintenance personnel need a defined recovery method when the electrical release is unavailable. The key route acts on the locking mechanism; it does not restore a failed controller or reconcile the airlock state automatically.
Choose this arrangement where key custody and access to the cylinder can be managed. A key-operated recovery feature alone does not establish suitability as emergency escape hardware. The required exit operation and the power-loss state must be settled for the complete doorway.
Specify the cylinder as part of the opening
Identify the side from which recovery is needed, cylinder length and projection, required cam compatibility and whether a cylinder is included in the supply. A convenient cylinder location can become inaccessible behind a cover, adjacent frame or parked door leaf. Check the actual key-turning space before approving the fabrication drawing.
Mortising gives a compact installation but needs adequate profile depth and reinforcement. An accessory surface housing avoids some pocket work while adding projection and fasteners. The housing must support both lock and strike in their working positions; it is not a universal adapter for any leaf or glass thickness.
Configuration to place on the schedule
| Component | Required definition |
|---|---|
| Electric bolt | 12.7 mm stainless pin reference, with matched strike |
| Supply | 12–24 VDC reference, with starting and holding loads stated by version |
| Retention | 10,000 N nominal reference class, conditional on the selected assembly |
| Manual release | Compatible Euro-profile cylinder, access side and keying arrangement |
| Installation | Mortise or approved surface housing and fastening detail |
| Failure behaviour | Electrical power-loss state and manual recovery sequence |
Do not assume that a keyed version has the same fail-unlocked behaviour as another bolt in the range. The key action, electrical command and relocking behaviour must be described together. Holding force also does not describe the effort required to release a pin trapped by excessive door pressure.
Prove recovery without defeating the operating sequence
Commission normal entry, electrical release, power loss and key release separately. Repeat with the door in its normal pressure condition. After manual use, verify that the key can be removed as intended, the bolt returns to service correctly and any supervisory system reports the resulting door and lock state.
Maintenance should include the cylinder, its fixing, the strike alignment and the accessibility of the override. Follow the selected cylinder and lock instructions for lubrication; adding general-purpose oil to an electrical mechanism can attract contamination. Include keying, housing, cylinder and strike explicitly in the quotation so that a bare electric lock is not mistaken for a complete recovery assembly.
Planning your Cleanroom Electric Drop Bolt Lock Key-Override specification?
Send us your dimensions, installation conditions, performance targets and required surface finish.