Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Wall & Ceiling Systems / Cleanroom Cove Base Skirting H64 Epoxy-Resin
zhengfeng-CLEANROOM-COVE-BASE-SKIRTING-H64-EPOXY

Cleanroom Cove Base Skirting H64 Epoxy-Resin

An H64 support interface for a separately specified epoxy mortar and finishing system.
  • The resin finish forms the exposed perimeter surface.
  • The H64 designation identifies the support profile in the base detail.
  • The metal profile provides a defined interface beneath the finish.
Request a Quote Browse Products

A base detail beneath an epoxy cove

The H64 aluminum base profile establishes an interface for a resin-finished cleanroom floor perimeter. The epoxy system forms the exposed cove, while the profile coordinates the junction with the wall panel. A 64 mm profile reference and the 24 × 33.5 mm floor-member dimensions describe support components, not the finished cove thickness, radius or height above the completed floor.

Use a material that can hold the vertical shape

A self-levelling floor resin should not simply be poured up a wall. A vertical or curved upstand normally requires a compatible coving mortar or a resin formulation designed to retain its shape, applied and finished using the selected system method. The primer, aggregate or filler and finishing coats must work together.

Assess adhesion to every substrate exposed in the detail. A primer approved for concrete or steel is not automatically approved for anodized or painted aluminum. Specify metal preparation and carry out the bond checks required for the chosen resin and support finish before proceeding.

Manage movement and finish continuity

Fix the profile and backing so they remain stable during application. Resin over a flexible or poorly supported edge can crack even when the resin itself is suitable. Resolve differential movement between the wall and floor with a designed joint; an apparently continuous cove must not bridge an active movement joint indiscriminately.

Form the radius, top edge and door-end transitions to the approved section, then seal pores or texture as required by the flooring system. Set curing and chemical exposure times from that system and actual site conditions. Inspect the finished surface for voids, pinholes and separation at the metal interface.

Quotation and acceptance basis

Supply the finished-floor build-up, wall-base section, required cove dimensions and cleaning chemicals. Separate the aluminum components, preparation, primer, coving material, topcoat and movement joints in the quotation. Acceptance should verify geometry, sound adhesion, closed surface and continuity with the floor. During service, investigate cracks at support transitions before applying a cosmetic resin patch.

Planning your Cleanroom Cove Base Skirting H64 Epoxy-Resin specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us