Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Air Ducts & Air Distribution / Cleanroom Ceiling Air Diffuser 300 x 300 mm Square Cone
zhengfeng-CLEANROOM-CEILING-AIR-DIFFUSER-300X300

Cleanroom Ceiling Air Diffuser 300 x 300 mm Square Cone

A compact removable square cone turns supply air toward four sides for room mixing, with the inlet and airflow selected for the actual room.
  • Four discharge sides spread supply around the outlet.
  • Compact square face fits small ceiling modules.
Request a Quote Browse Products

Four-way mixing from a compact ceiling outlet

The 300 x 300 mm square cone diffuser turns supply air outward through the spaces between its formed-metal cones. It is intended for compact support rooms, gowning areas and laboratory comfort ventilation where room mixing is part of the airflow design. It is an air-distribution fitting, not a HEPA filter or a protective unidirectional-flow outlet.

A four-way pattern does not guarantee that all parts of a small room receive adequate ventilation. A wall close to one side, a tall cabinet or a nearby return can alter the supply path. Locate the outlet using the actual airflow, ceiling height, supply temperature and occupied-zone requirements.

Dimensions do not replace performance selection

Catalog detailProcurement interpretation
Nominal face300 x 300 mm.
Ceiling opening249 x 249 mm reference for the listed construction; check the selected border drawing.
ConstructionFormed steel cones with white coating.
CoreRemovable for room-side access.
MountingLay-in or surface arrangement with corresponding frame.
InletCircular neck; diameter to be selected.
OptionsCompatible neck damper and sectorizing baffles.

The face dimension is not the neck diameter or effective discharge area. Size the neck and core combination from the supplier's airflow, pressure, sound and throw data. Higher inlet velocity may increase available throw but can also increase noise and resistance. At reduced flow, check that cool supply air does not descend prematurely into occupied areas.

Control the inlet and discharge separately

A neck damper balances volume; sectorizing baffles alter where the air leaves. Closing a sector changes the remaining discharge duty and requires a revised performance check. For a corner position, a purpose-selected directional outlet may be more suitable than heavily restricting this four-way cone.

Support and connect the duct so it does not load or deform the removable core. Leave space for the core to be released and refitted. Avoid sharp, crushed duct connections immediately at the neck; an uneven inlet can change the intended pattern and complicate airflow measurement.

Cleaning and handover

Remove surface deposits with a method compatible with the coating, keeping the cone edges and retained parts undamaged. Record baffle and damper positions before disassembly. A cold neck in humid ceiling space may require a coordinated insulation and vapour-seal detail; face coating alone does not prevent condensation.

Quotation should state the border, neck size, damper, baffles, backpan insulation and fixing scope. Acceptance includes secure core retention, measured supply quantity and the agreed sound and room-distribution checks. Judge throw against a specified terminal velocity and test condition, not a distance printed without its measurement basis.

Planning your Cleanroom Ceiling Air Diffuser 300 x 300 mm Square Cone specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us