Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Air Ducts & Air Distribution / Cleanroom Air Transfer Grille 300 x 300 mm No-Sight
zhengfeng-CLEANROOM-AIR-TRANSFER-GRILLE-300X300

Cleanroom Air Transfer Grille 300 x 300 mm No-Sight

size room-to-room airflow against pressure, coordinate both-side frames and preserve the required room separation.
  • Larger core increases the available transfer opening.
  • Overlap cover conceals the cut edge of the partition.
Request a Quote Browse Products

A medium transfer path within the room air balance

The 300 × 300 mm no-sight grille allows air to move between adjoining support rooms through fixed overlapping louvers. Its larger square core provides more geometric opening than the 200 mm format, but the resulting airflow still depends on the pressure difference and the effective passages of the selected assembly.

Size from transfer flow and allowable pressure

A room supplied with more air than it extracts needs a defined route for the surplus. Conversely, an extract-dominant room needs suitable replacement air. The transfer grille is one resistance in that path, alongside door gaps and other openings. Enlarging it can reduce resistance but also change the pressure difference maintained between rooms.

The fixed core does not regulate a pressure cascade. Fan schedules, other openings and door movement can alter flow or reverse its direction. Check the operating modes that matter to the project rather than accepting a nominally bidirectional opening as controlled ventilation. The air transferred must be compatible with the receiving room.

Reference mounting geometry

FeatureCoordination detail
Nominal core300 × 300 mm.
Reference core dimensions298 × 298 mm, with final clearance taken from the selected assembly.
Outside cover380 × 380 mm reference aluminum face.
Surface and mountingPowder coating with a door-thickness or partition fixing arrangement.

A cover hiding the cut edge does not seal the internal wall cavity. Close and support that interface so transfer air travels through the intended path. Keep the rear frame, screws and door hardware clear of each other, and obtain the applicable detail before modifying a fire- or smoke-resisting assembly.

Visual screening and maintenance

Overlapping blades obstruct direct sight but are not a tested acoustic attenuator or a light-tight screen. Where conversations or sensitive lighting need protection, include that separate requirement in the selection. Adding an acoustic transfer path changes depth and airflow resistance.

Remove dust from concealed passages and inspect coating and fixings after cleaning. The quotation should define both-side finishes, frame depth, transfer duty and required evidence. At handover, record flow direction, transfer quantity and room pressure in the agreed door and fan conditions. Preserve access so later cleaning does not require damage to the partition.

Planning your Cleanroom Air Transfer Grille 300 x 300 mm No-Sight specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us