Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Air Ducts & Air Distribution / Cleanroom Air Distribution Plenum Box 300 mm Diffuser with DN160 Spigot
zhengfeng-CLEANROOM-AIR-DISTRIBUTION-PLENUM-300-DN160

Cleanroom Air Distribution Plenum Box 300 mm Diffuser with DN160 Spigot

coordinate the complete ceiling envelope, equalising element, matched face and balancing options.
  • Small box footprint suits compact ceiling outlets.
  • Internal equalisation reduces concentrated inlet flow.
Request a Quote Browse Products

Connect a small diffuser without feeding one edge directly

This side-entry plenum connects a DN160 circular supply branch to a nominal 300 mm ceiling diffuser. Air entering horizontally expands into the chamber and passes the internal equalising element before reaching the diffuser. The element helps redistribute the inlet jet, while the diffuser face establishes the final room-air pattern.

Small box dimensions are not the ceiling-space requirement

ReferencePlanning implication
266 × 266 mm casingAllow separately for supports, flanges and the selected diffuser fixing.
250 mm heightAdd connection, suspension, insulation and access space to the installation envelope.
158 mm spigot outside diameterReference mating size for a DN160 connection, subject to its seal and tolerance.
Galvanized sheet-steel constructionAssess finish, joints and cleaning exposure for the proposed room.

The 300 mm diffuser designation does not identify a universal fixing interface. Face shape, neck dimensions and attachment must match the offered box. A small ceiling opening may allow access to the face while still preventing removal of the complete plenum.

Equalisation has a pressure cost

The internal element adds resistance as it redistributes air. Select box and diffuser together for airflow, pressure loss and sound. A sharp bend or compressed flexible connection immediately at the inlet can create an uneven approach that the chamber may not fully correct. Preserve the specified inlet arrangement and keep the element installed.

An optional spigot damper provides balancing; it does not regulate constant flow automatically. If measurement tubing is included, use the calibration for the exact box and diffuser combination. A pressure reading by itself is not an airflow measurement.

Installation and service

Suspend the box from suitable supports without loading the diffuser face or assuming that ceiling tiles carry it. Seal the branch and face interfaces. Where cold supply air creates condensation risk, specify insulation and continuous vapor control for the actual conditions.

For quotation, identify the diffuser, branch approach, duty, damper and measurement options, supports and insulation. Handover should verify the installed airflow, distribution, secure attachment and accessible adjustment. Keep the chamber and equalising element clean by an approved method. This distribution box does not contain a terminal HEPA filter or establish room cleanliness on its own.

Planning your Cleanroom Air Distribution Plenum Box 300 mm Diffuser with DN160 Spigot specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us