Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Flooring / Chemical-Resistant Novolac Epoxy Flooring 0.5 mm Coating
zhengfeng-CHEMICAL-RESISTANT-NOVOLAC-EPOXY-FLOORING-NC05

Chemical-Resistant Novolac Epoxy Flooring 0.5 mm Coating

A high-solids novolac coating provides a compact chemical-contact face over a suitably prepared, sound base.
  • High-solids novolac epoxy
  • 0.3-0.5 mm wet-film application
  • Smooth stand-alone coating configuration
Request a Quote Browse Products

A thin chemical-contact face over sound concrete

NC05 is a two-component, high-solids novolac epoxy coating over a compatible primer. Its 0.3–0.5 mm application range is wet-film thickness; 0.5 mm identifies the upper coating selection. The smooth finish suits sound process-support floors exposed to splash or intermittent spills when the selected formulation is compatible with those chemicals.

Wet film, cured film and substrate repair are different quantities

The cured thickness depends on the supplied material's volume solids and application conditions. High solids does not automatically mean every wet millimetre remains as cured film. State wet and dry requirements separately in the specification and use a suitable measurement method. The coating cannot replace a repair mortar in hollows, broken edges or rough concrete.

Coverage also depends on substrate profile, absorption and application loss. A theoretical area per litre assumes a defined film thickness on a suitable surface; spreading the material farther can leave weak coverage at peaks. A representative trial and wet-film checks are more useful than using nominal coverage alone as acceptance.

Select the exact chemical exposure

Novolac epoxy is a resin family used for demanding chemical contact, but formulations vary. Assess each substance and cleaning agent at its concentration, temperature, contact duration and spill frequency. A splash-resistant coating is not automatically suitable for immersion or liquid containment. Joints, coves, penetrations and drains need compatible details wherever liquids can collect.

Prepare and prime the base to prevent loss of adhesion and pinholes. Respect the selected mix ratio, working time and recoat interval. Foot-traffic readiness and full chemical cure are separate milestones; early exposure can damage a surface that already feels hard.

Quote and inspection requirements

Include preparation, repairs, primer, specified coating build, perimeter treatment and any integrity testing required by the containment design. At handover record substrate conditions, application thickness, cure and the chemical-resistance basis. Keep spills within the agreed cleanup interval and inspect scratches or exposed concrete promptly. Abrasive wheels and repeated impacts may justify a thicker mortar construction rather than repeated thin-coat repairs.

Planning your Chemical-Resistant Novolac Epoxy Flooring 0.5 mm Coating specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us