Your One-Stop Supplier for Cleanroom Equipment and Aseptic Facility EssentialsInternational Project Support
Open mobile navigationClose mobile navigation
Home / Products / Cleanroom Flooring / Chemical-Resistant Novolac Epoxy Flooring 6 mm Mortar
zhengfeng-CHEMICAL-RESISTANT-NOVOLAC-EPOXY-FLOORING-MORTAR-6MM

Chemical-Resistant Novolac Epoxy Flooring 6 mm Mortar

A trowelled mineral mortar uses novolac binder through the body, with a separate finishing package where required.
  • Novolac binder through the mortar body
  • Nominal 6 mm trowelled build
  • Four-component graded-aggregate system
Request a Quote Browse Products

Novolac resin throughout a compacted mortar body

This four-component mortar combines novolac epoxy, an amine curing agent, pigment and graded mineral aggregate. The nominal selection is 6 mm within a 3–6 mm application range. The binder through the mortar body distinguishes it from a conventional epoxy screed carrying only a novolac top seal.

Bulk chemistry does not remove the need for a finished surface

Aggregate supplies the mineral structure and the cured binder holds it together. Mixing and compaction determine whether the body is uniform or contains poorly wetted material and voids. The full novolac binder can be useful where both loading and chemical exposure affect the floor, but resistance still depends on the exact formulation and chemical conditions.

A raw trowelled face may not be sufficiently closed for the intended cleaning routine. A compatible chemical-resistant lining can improve surface closure and provide the required exposed finish. Full waterproofing or liquid retention also needs a coordinated membrane, joints and edge design; the resin name and nominal 6 mm depth do not prove containment.

Organize placement around the bond coat

Prepare and repair the substrate before mixing batches. Use equipment suitable for the complete four-component mortar and distribute the curing agent and pigment uniformly before and during aggregate addition as instructed. Keep the mix within its working time; adding unapproved liquid to extend workability changes the system.

Place the mortar into the required bond-coat condition. Where the approved method requires a tacky primer, plan the primed area to match the crew's laying rate and re-prime sections that have become tack-free according to the system instructions. Preserve thickness at loaded edges and continue movement joints through the appropriate detail. Integral coves require a sound wall junction and compatible finishing.

Procurement and verification

The quotation should separate mortar, primer, lining if selected, waterproofing where required, coves and joint work. Establish the chemical list, concentration, temperature, exposure interval and mechanical load before selection. Acceptance includes thickness, bond, compacted surface quality and complete chemical cure. Cured hardness alone cannot establish impact tolerance or chemical resistance. Inspect joints and damaged areas after spills and restore the full required layer sequence during repairs.

Planning your Chemical-Resistant Novolac Epoxy Flooring 6 mm Mortar specification?

Send us your dimensions, installation conditions, performance targets and required surface finish.

Talk to Our Team
Inquiry Form

Home

Products

News

About Us

Contact Us